Textination Newsline

"Packaging made from bio-based plastics has long been established. We are now supporting the further development of these materials for new areas of application. If in the future the market also offers plant-based materials for technically demanding tasks such as vehicle construction, the bioeconomy will take a decisive step forward," explained Uwe Feiler, Parliamentary State Secretary at the Federal Ministry of Food and Agriculture, in Potsdam. The occasion was the handover of a grant to the Fraunhofer Institute for Applied Polymer Research IAP. The Fraunhofer IAP wants to develop a composite material that consists entirely of bio-based polylactic acid (PLA) and is significantly easier to recycle than conventional fiber composites.

The German Federal Ministry of Food and Agriculture (BMEL) is intensively promoting the development of biomaterials as part of its Renewable Resources funding program. More than 100 projects are currently underway, covering a wide range of topics: from plastics that are degradable in the sea to natural fiber-reinforced lightweight components for the automotive sector. The projects are supported by the Agency for Renewable Resources, the BMEL project management agency responsible for the Renewable Resources funding program.

Easier recycling of fiber-reinforced plastics
PLA is one of the particularly promising bio-based materials. The global market for this polymer is growing by around 10 percent a year. PLA is also used, among other things, as a matrix in fiber-reinforced plastics. In these mechanically resilient plastics, reinforcing fibers are embedded in a plastic matrix.

The Fraunhofer IAP project is now focusing on these reinforcing fibers: "We are further developing our PLA fibers in order to transfer them to industrial scale together with partners from industry. These fibers are ideally suited for reinforcing PLA plastics. The resulting self-reinforcing single-component composite promises great recycling benefits. Since the fiber and the matrix of PLA are chemically identical, complex separation steps are not necessary," explains Dr. André Lehmann, expert for fiber technology at Fraunhofer IAP.

Novel PLA fibers and films are more thermally stable
The challenge with this approach is that conventional PLA has a relatively low temperature resistance. Technical fibers can be produced most economically using the melt spinning process. The Fraunhofer IAP team is now using more thermally stable stereocomplex PLA (sc-PLA) for the fibers. The term stereocomplex refers to a special crystal structure that the PLA molecules can form. Sc-PLA fibers have a melting point that is 40 - 50 °C higher and can therefore withstand the incorporation process in a matrix made of conventional PLA. In the project, the researchers are developing and optimizing a melt spinning process for sc-PLA filament yarns. The partner in this work package is Trevira GmbH, a manufacturer of technical and textile fiber and filament yarn specialties that are in demand from automotive suppliers and contract furnishers, among others. Furthermore, the development of a manufacturing process for sc-PLA reinforced flat films is planned. The international adhesive tape manufacturer tesa SE is participating in this task, and will test the suitability of sc-PLA films as adhesive foils. In a third work package, the Fraunhofer IAP will finally process the filaments in a double pultrusion process to produce granules suitable for injection molding.

Bio-based solutions for the automotive and textile industries
The scientists led by Dr. André Lehmann are certain that the self-reinforced PLA material can conquer many new areas of application. The automotive and textile industries are already showing interest in bio-based materials that are also easier to recycle. In terms of price, PLA would already be competitive here, and now the material is also to be made technically fit for the new tasks.

Professor Alexander Böker, head of Fraunhofer IAP, says: "The steadily growing demand from industry for sustainable solutions underlines how important it is to develop biobased and at the same time high-performance materials. With our research, we are also actively driving the development of a sustainable and functioning circular economy and therefore very much welcome the support from the federal government."

Information on the project is available at fnr.de under the funding code 2220NR297X.

The digital Performance Days will kick off on May 17 through to May 21, providing online access to even more information, current trends, all the latest material innovations and enhanced tools while providing all within the industry the opportunity to interact with one another and with exhibitors.

The focus of the trend-setting PERFORMANCE FORUM in summer will highlight the winners of the two awards. This year, the jury will present a PERFORMANCE AWARD as well as an ECO PERFORMANCE AWARD.

Function revisited: Outstanding fabric innovations for the Summer 2023 season
Plant-based fibers such as hemp, organic cotton, bamboo, wool, kapok or coconut shell remain in demand, with manufacturers increasingly refraining from the use of environmentally harmful chemicals, avoiding micro plastics, advocating natural dyeing processes and striving to either return fabrics back into the cycle, to recycle plastic and other waste or to produce fibers in such a way that they are biodegradable.

In the Marketplace, visitors have the opportunity to view more than 9.000 exhibitors’ products, including the fabric highlights of the individual PERFORMANCE FORUM categories. In order to present the fabrics to visitors in digital form as realistically as possible in terms of feel, design and structure, the PERFORMANCE FORUM has been equipped with state-of-the-art 3D technology, including innovative tools such as 3D images, video animations and U3M files for download.

Exceptional: PERFORMANCE AWARD & ECO PERFORMANCE AWARD Winners
For the Spring/Summer 2023 season, the jury also presented two awards for outstanding new developments – so in addition to the PERFORMANCE AWARD, presented to the winner Trenchant Textiles, there is also an ECO PERFORMANCE AWARD winner, in this year’s case, Utenos Trikotazas.

Sustainability at the highest level, wellbeing for body & soul:
With its fully biodegradable, brushed fleece material made of 11% hemp, 63% organic cotton and 26 % Tencel, Utenos Trikotazas fully convinced the jury and picked up the ECO PERFORMANCE AWARD for its sustainable comfort. The extremely comfy material is pleasant on the skin and impresses with an incredibly soft feel. Hemp is known for its natural anti-bacterial properties and natural UV protection. In combination with organic cotton and Tencel, this fabric guarantees ideal warmth and odour regulation.

Function redesigned, breaking down borders and creating space for the new: In keeping with the Focus Topic of the digital fair week “Still Physical – Your Success Story of 2020”, Trenchant Textiles combined functional features with fashionable design in its new fabric construction, fully deserving of the PERFORMANCE AWARD. The membrane on the outer side, SlickrB, is made of non-toxic, sustainable polypropylene membrane. By printing dot patterns on the surface of the membrane, the fabric provides greater abrasion resistance while maintaining its breathability properties. Absolutely revolutionary: patterns and colors can be altered individually according to preference. The inner liner made of N15DW (15D woven polyamide) also provides tear resistance as well as sufficient, adequate stretch.

Water-repellent and more: coating textiles sustainably with chitosan

Textiles can be coated with the biopolymer chitosan and thus made water-repellent by binding hydrophobic molecules. The good thing is that this can also replace toxic and petroleum-based substances that are currently used for textile finishing. In the last few years Fraunhofer IGB and partners in the HydroFichi project have researched how this can be done: A technology has been developed to provide fibers with the desired properties using biotechnological processes and chitosan.

The manufacture of textiles is, even nowadays, still largely characterized by the use of chemicals: biotechnological processes, enzymes and renewable raw materials have so far played a subordinate role. For example, at present chiefly perfluorinated chemicals are used when finishing textiles to obtain water- and oil-repellent properties. These are harmful to health and also only degradable to a small degree, which is why they remain in the environment for so long.

The Fraunhofer Institute for Interfacial Engineering and Biotechnology IGB has been researching sustainable biobased alternatives for some time. In the HydroFichi project – short for Hydrophobic Finishing with Chitosan – which was completed at the end of January 2021, researchers at the institute developed a way of producing chitosan from waste streams and using the biopolymer not only as a sizing agent in the processing of yarns, but also for the functionalization of textiles in the finishing process.

Chitosan from waste for environmental protection, medical purposes or textiles
Chitosan is a renewable raw material that is derived from chitin; after cellulose, it is the second most common naturally occurring biopolymer. Sources of the nitrogen-containing polysaccharide can be crab shells from fishing waste, insect skins and shells that result from the production of animal feed, or – as a vegan variant – the cell walls of mushrooms. The structure of the two molecules is very similar; the only difference is an acetyl group, which is removed when it is converted to chitosan. Chitin is insoluble in water and most organic solvents. Chitosan is also not readily soluble; however, the addition of mild acids makes the biopolymer water-soluble and it can therefore be used as a textile auxiliary.

In order to isolate chitosan from a particular waste stream, chitin must first be obtained from the starting materials by means of demineralization and deproteinization and then its derivative chitosan. The properties of chitosan can be individually adapted by choosing the appropriate conditions. The biomolecule produced in this way can be used directly in a wide variety of practical applications – for example as a flocculant in wastewater treatment or as a drug carrier in medicines.

There are also numerous conceivable uses for chitosan in the textile industry. In sizing, for example, the efficiency of the natural substance has proved convincing in pilot scale tests carried out by the German Institutes of Textile and Fiber Research Denkendorf. Here, the effectiveness was shown in the significantly lower roughness of the yarns after weaving textile fabrics. The values achieved with chitosan from insects were comparable to those from commercial crab shells. In the future, this fact will enable completely new possibilities of extraction in line with the bioeconomy.

As a renewable raw material, chitosan replaces fossil chemicals
“Our aim in the HydroFichi project was to provide the textile industry with a raw material for a wide variety of applications that can be obtained from renewable educts, at the same time avoiding chemicals that damage the environment and health,” explains project manager Dr. Achim Weber, deputy head of the innovation field Functional Surfaces and Materials at Fraunhofer IGB. “In addition to simple coating with chitosan, which protects the fibers, we were also able to use the substance as an anchor molecule to create cross-linking points for a wide variety of functional groups and thus to provide textiles with specific properties such as making them water-repellent. Chitosan can therefore function as a matrix material or template at the same time, and this can be done with a wide variety of fiber materials.”

The finishes were evaluated using standardized tests, but also with specially designed test stands and methods. For example, measurements on treated textiles showed contact angles of over 140°. This means that the fabrics are very water-repellent and confirms that the processing of the textiles has been successful. In a next step, the technology developed at the IGB is to be transferred from the laboratory scale to the much larger pilot scale in order to make the sustainable biomolecule ready for market use as quickly as possible, for example in the sports and outdoor sector.

For the first time biotechnological processes in textile finishing
In the project, the IGB scientists and four partners from the textile industry – the German Institutes of Textile and Fiber Research Denkendorf (DITF), J.G. Knopf's Sohn GmbH, Helmbrechts, and Textilchemie Dr. Petry, Reutlingen – were able for the first time to establish biotechnological processes in raw material extraction and finishing that have proven to be compatible with all textile processes. So far, this is a unique selling point in the finishing of textiles. “We have all recognized the great potential of chitosan for efficient hydrophobization and as a functional carrier. And, thanks to the good cooperation, we were able to successfully establish techniques for tailor-made functionalization of textiles,” adds Dr. Thomas Hahn, who conducts research in the innovation field of Industrial Biotechnology at the IGB. “In addition, other fields of application for the biopolymer are very promising. That is why we initiated the follow-up project ExpandChi immediately after HydroFichi, in which together with our partners techniques are to be developed to use biobased chitosan as a functional carrier to replace other synthetic polymers, for example for a special anti-wrinkle or flame-retardant coating. The textile industry is very interested in utilizing such a sustainable biomolecule as quickly as possible.“

The “HydroFichi” project was funded by the German Federal Ministry of Education and Research (BMBF) under promotional reference 031B0341A; the follow-up project “ExpandChi”, which began in February 2021, is funded under promotional reference 031B1047A.

Circular instead of throwaway economy - from fast fashion to zero-waste philosophy. The key elements of the circular economy in the fashion business are: Avoiding waste and pollution through new processes, continuous recycling of products and materials, and regeneration of natural systems. Textination talked with Olaf Schmidt, Vice President of Textiles & Textile Technologies, and Thimo Schwenzfeier, Show Director of Neonyt, from Messe Frankfurt about the Neonyt trade show as a business and communication platform for circularity & fashion.
 
It has been about 10 years since Messe Frankfurt ventured onto the "sustainable" fashion trade show stage. Initially with the Ethical Fashion Show, then with the Greenshowroom, there were two trade show formats in Berlin dedicated to the topic of green fashion. What prompted you as a trade show organizer to launch such a special format in Germany at that time?

Olaf Schmidt: Messe Frankfurt's Texpertise Network brings together the world's most important textile trade shows - at around 60 events worldwide, we show what drives the textile and fashion industry. We present the current topics and trends and set impulses for the entire textile value chain. Messe Frankfurt recognized the need for a suitable platform for the future topic of sustainability at an early stage. It was therefore obvious to expand our expertise in the field of fashion and to meet the demand from this segment. To achieve this, we have adapted and realigned existing formats: After launching the Ethical Fashion Show in Paris in 2004, Messe Frankfurt France took over the event in 2010. Two years later, Messe Frankfurt founded the Ethical Fashion Show Berlin in Germany and found, with the moving of the event to the polarizing capital, the ideal location for the coming years. Messe Frankfurt merged the already existing Greenshowroom with the Ethical Fashion Show, and from January 2015 the two shows took place in one venue. For Messe Frankfurt, hosting these events was the next logical step on our way to a sustainable fashion future - the concept is now established in the sustainable fashion market and has a continuous growth potential. The merging of the trade show duo in 2019, with the current name Neonyt, allowed us, our exhibitors and visitors a new content orientation and a holistic approach to the topic of sustainability as well as a more direct access to the conventional fashion market, especially with regard to retail. In summer 2021, Neonyt will take place for the first time in the new fashion hotspot Frankfurt as part of the new Frankfurt Fashion Week.

 
In 2019, both event formats were merged, the new trade show Neonyt was born and 1 + 1 became what? What components does Neonyt offer in addition to the previous trade show concepts, what is so "new-new" and how did you actually come up with the name?

Thimo Schwenzfeier: One plus one, as you so nicely put it, did not simply add up to two with Neonyt. One plus one equals unique, neo-new, internationally relevant: Among other things, the trade show business was supplemented by the international conference format Fashionsustain and a showcase to gradually bring
together the topic of sustainability with the topics of technology, innovation and prepress. Our content creator format Prepeek ensures the necessary lifestyle and the fashion show provides the glamour of the fashion world. Neonyt combines the most important elements of the international textile and fashion industry - style, business, inspiration, innovation, knowledge, fun and community. And that is exactly what makes Neonyt so "new-new". Progressive and polarizing - the artificial word Neonyt is derived from the ancient Greek word "neo" (eng. new, revolutionary) and the Scandinavian word "nytt" (eng. new). "The renewed new" - Neonyt is our synonym for the fundamental transformation process of the textile and fashion industry, a reinterpretation of what has already been there and our commitment not to stand still and to promote positive change together.

 
For the Neonyt trade show format, you have teamed up with partners - for example, for conferencing components and in the design area. What expertise do they provide, and what is the added value for exhibitors and visitors?

Thimo Schwenzfeier: We know which future topics our brands and the community are currently dealing with and therefore create the right platform - for personal encounters and exchange, for networking and successful business deals. To put it simply: we organize trade shows, we organize events, we provide the right setting, we connect people and business. Neonyt therefore forms the global interface between the various players in the textile and fashion industry - between industry, trade, politics, services and consumption. And so that a lively, transparent and, above all, authentic dialog can develop between all counterparts, we naturally draw on the knowledge of industry experts and form strong partnerships to push fashion and sustainability forward. Only together can we achieve real change and guarantee that our community is provided with sufficient and, above all, the right information to make self-determined decisions.
 

In recent years, the keyword circularity - or rather closing the loop - has been encountered everywhere in the fashion industry. Whether Stella McCartney, the Ellen MacArthur Foundation, or large retail groups - many players and decision-makers are of the opinion that the future of the fashion world lies only in a circular economy and not in downcycling of any kind. What is Neonyt's view on this?
         
Thimo Schwenzfeier: That's right, the concept of circular economy is not new, nor is it limited to the textile and fashion industry. Circularity - actually the ultimate for every product, every industry, for our global society. The concept is supposedly simple: All materials and products are kept in a closed loop, the useful life is increased and at the end of the product life cycle everything is recycled. Many sustainable fashion labels are already showing how it's done. Neonyt brands are right at the forefront and are already implementing practices that should become the norm as soon as possible: starting with T-shirts or shoes made from recycled materials and take-back systems for collection items. As well as compostable clothing that "dissolves" at the end of the product life cycle and breaks down into its natural components, and on to repair services and leasing models for denim and co. - thinking holistically, acting in a sustainable manner and producing in a circular way are definitely the trends of the coming fashion seasons and at least one important, if not the most important, component of the future fashion world.

 
For the idea of a circular economy to be implemented successfully, there needs to be an interplay between technology, production, design and sales. What presentation options and forms of communication does Neonyt have in store for the various components?  

Thimo Schwenzfeier: The combined innovative power of technology, sustainability and digitization is an important driver of the current developments in the textile and fashion industry - including the topic of circularity. Processes and production sequences are changing along the entire value chain - the industry has to reinvent itself for the most part. Neonyt shows how this can work successfully in the long term, with the internationally established Fashionsustain conference format - including spin-offs in China, Europe and the USA - and the supplementary Showcase. Together, these two formats offer the ideal mix of orientation and inspiration to prepare the industry for the future. Virtual fashion, authentic brands and textile value chains, science and innovation as well as retail, business models and impact investment - at Fashionsustain, top-class experts will exchange ideas with an interested professional audience and discuss the change and new solutions in the textile and fashion industry. The Neonyt Showcase takes a deeper look at the topics and innovations presented and discussed on the Fashionsustain stage. Expert knowledge on-demand, so to speak: whether microfactories or installations - Neonyt brands as well as brands from the rest of the Texpertise Network of Messe Frankfurt, such as exhibitors at Texprocess, get the chance to present sustainable innovations, new technologies and materials, initiatives, change-maker campaigns or research projects. Here they interact directly and practically with Neonyt's international cross-sector community.
 

Last year was an unprecedented challenge for trade show companies due to the pandemic situation. Neonyt was also affected by this - and physical events had to be canceled. With a digital format "Neonyt on Air" you have tried to offer exhibitors and visitors an alternative platform. What has been your experience: Did the focus of the trade show and its community perhaps even help to make such a virtual event easier to launch? 

Olaf Schmidt: Corona has already changed a lot and will certainly continue to do so in one way or another. Nevertheless, it will continue to be our task as trade show organizers to offer the industry the best possible meeting platforms for presenting their new products worldwide. We are convinced that people will continue to want to meet in person and discuss new products as well as services in the future. This is particularly the case in the textile sector, where haptics plays a very crucial role. We expect that there will even be a certain catch-up effect after the crisis. Because what the last two very successful digital seasons of Neonyt on Air, for example, have nevertheless shown clearly: Fashion lives from personalities, presentation and inspiration. Digital formats can support this, but they cannot fully replace it.
 
Thimo Schwenzfeier: The digital Neonyt on Air was far from being a total replacement for the original physical seasons, but nevertheless a huge success. For one week, fashion, lifestyle and digital experts were discussing about more authenticity, immediacy and transparency in the textile and fashion industry in numerous keynotes, interviews and panel discussions. With more than 24,000 international followers on Instagram, we generated around 50,000 impressions and more than 4,700 content interactions with our presenting partners Grüner Knopf, Hessnatur and Oeko-Tex in just five days. These figures show, that the topic of sustainability has arrived in the middle of society and is being discussed across all industries. I think that the polarization and, above all, the prevailing restrictions, as far as trade and commerce are concerned, have certainly contributed to holding a successful digital format. Digitization was truly the booster for the fashion industry in this case: Instead of replacing personal exchange, it helps to maintain and expand the business activities of brands, especially in the current times. And quite clearly, the need for exchange in the fashion industry and the motivation to initiate together a change are still enormous. Neonyt on Air has once again shown us that clearly. However, we are already looking forward to the next physical edition of Neonyt.
 

The COVID-19 pandemic has also left its mark on the textile and clothing industry. When you look back on just under a year of "state of emergency" - what positive experiences do you take with you, where do you see a need for improvement, for what support are you grateful for and where did you feel you were left on your own? 

Olaf Schmidt: A year like no other - that can clearly be said about the last one. The Corona pandemic caught everyone off guard - us as trade show organizers, but of course also our exhibitors, visitors and partners. Especially in the near future, we must continue to expect, that trade shows can only be held under stricter health and safety regulations at first. Messe Frankfurt reacted quickly and developed a comprehensive safety and hygiene concept. One thing was clear: we all had to adjust and deal with a new situation. And so far, we've done a great job together, the team understanding among each other, the close contact - although physically at a distance, but globally networked - between all those involved, makes me feel positive about the future. For me, an important realization of this global pandemic, a credo almost, is to be open to new ways and opportunities and to find ways to combine things rather than separate them: Hybrid solutions, so to speak.    

Thimo Schwenzfeier: There was no master plan for Neonyt, and in places there was also the impression that we now had to "reinvent the wheel": How does collaboration work when face-to-face meetings cannot take place? Can digitized contact compensate for the social distancing that is currently being imposed and still make it possible to work closely together? How can business relationships be maintained when stores are closed? How can priorities be set when well-tested solutions and established annual plans lose their validity? Who am I, who are 'the others' and what defines community? Never have questions about our creation and existence, about what makes us who we are and what we want to be, been more relevant than right now. One thing that I take away from the current situation and that allows me to continue to look forward positively despite difficult circumstances is the fact, that cohesion and solidarity with one another - both privately and professionally - have become increasingly important. Like a magnifying glass, the crisis has magnified existing opportunities, but also challenges, and brought the essentials into focus. I think that if we continue to try to experience things more consciously and not take them for granted, we will manage together to create a " new normal " and leave this crisis with more strength.
 

As in the past in Berlin, Neonyt is currently also located in Frankfurt in the environment of the Fashion Week and conventional trade shows. Can you imagine that a special event concept like Neonyt will be unnecessary in a few years, because the circularity concept will have established itself in the clothing industry worldwide?

Olaf Schmidt: A clear no. Sustainability per se is already no longer a unique selling point. The important thing is to keep up with the times, to follow trends or, even better, to track down new trends yourself and develop them further. Things, strategies, concepts will always change - if last year showed us one thing, it was certainly that. It is more than desirable that we all learn from this crisis and reflect on the really important values, on solidarity between partners, on climate protection and sustainability. It may be exactly for this reason, that companies that place particular emphasis on sustainability will emerge even stronger from this crisis. So you can be sure that we, as a leading international trade show organizer for the textile industry, will continue to focus on sustainability and support future-oriented companies and solutions. However, this will not make our formats obsolete due to the establishment and normalization of holistic business practices in the textile industry. But it is impossible to make an exact forecast for the coming decades. Over the last few months, we have all noticed ourselves in our personal everyday lives or in our professional lives, how uncertain and volatile the future is. What is clear, however, is that the fashion industry - the world in general - will change even faster than before. And therein lies the opportunity for formats like Neonyt. The ten-year history shows in how many directions Neonyt has already developed, content focal points have been shifted and it has reinvented itself - this will also be the case in the future.
 

Mr. Schwenzfeier, in addition to your role as Director of Marketing Communications for Messe Frankfurt's textile exhibitions, you have also been Show Director of Neonyt since 2018. You have spoken to many exhibitors and visitors - which ideas or creations have particularly impressed you?

Thimo Schwenzfeier: I think it's not so much the individual innovations or creations of the exhibitors at our trade shows. And I deliberately choose the plural here. Because in my function as Director of Marketing Communications in the Textiles & Textile Technologies division of Messe Frankfurt, Neonyt is just one of "my" events. I think it's more the variety of fashion, technical and professional innovations that brands, labels, companies, start-ups and designers present every year. But if I really had to choose one innovation, it would probably be the vegan "Currywurst" sneakers made of red pepper and recycled PET bottles - the same label also offers shoes made of wood, stone, coffee and mushrooms or now even meteorite particles. It is impressive to experience every season anew of how creative the textile and fashion industry is.
 

Breaking new ground means being willing to make decisions, overcoming fears - and thus also having the courage to fail. Not every project can succeed. In retrospect, about which entrepreneurial decision by Messe Frankfurt are you particularly glad, that you made?
 
Olaf Schmidt: Clearly the decision to create Neonyt. To establish our own trade show format for fashion, sustainability and innovation and to integrate the freedom and lifestyle, which entail this topic, into our event. After more than a decade, we may be saying goodbye to Berlin in 2021, but not to our community and our spirit. Together we look back on many fashionable seasons and great locations in the capital: starting in the Hotel Adlon Kempinski to the Ewerk, the Postbahnhof, the Kronprinzenpalais, the Funkhaus and the Kraftwerk to the last physical event in Tempelhof. With the turn of the year and in the setting of Frankfurt Fashion Week, Neonyt is about to move to the metropolis by the Main. In Frankfurt, worlds collide: Skyscrapers and 19th-century villas. Architectural sins and masterpieces. Business and middle class. Red-light district and luxury boulevard. Frankfurt Fashion Week sets new impulses in this area of conflict. And in the middle of all this is Neonyt. The signs are pointing to a new beginning - a restart for the entire fashion industry, together we are taking sustainability to the next level - the focus topics Applied Sustainability and Applied Digitization are creating a completely new Fashion Week ecosystem in the metropolis by the Main.
 

If everything works out, Neonyt can be held again as a face-to-face event for the first time in July 2021. What are your plans? What and who can visitors look forward to? And what backup is there for a worst-case scenario?

Thimo Schwenzfeier: Of course, due to the currently ongoing tense situation around Covid-19, it is difficult to make binding statements about the next physical event. However, we are cur rently expecting the situation to ease into the summer summer 2021 is therefore on the health of everyone - exhibitors, visitors, partners and employees of Neonyt. Messe Frankfurt has developed a concept that includes detailed hygienic measures: Hygiene, distance and fresh air supply are important factors, which we coordinate with the responsible authorities in Frankfurt and those in charge of Frankfurt Fashion Week. In due course, the Neonyt community will receive advice and recommendations for the trade show attendance and participation, that comply with current regulations. We have not yet thought about a concrete backup for a worst-case scenario, as we are currently anticipating a physical B2B event - but the last two seasons have shown, should it not be possible to hold the Neonyt face-to-face, that we are quite well positioned with the digital Neonyt on Air and could certainly adapt the format for another summer event. We regularly exchange ideas with all market participants and try to get a sense of opinions and wishes from our community through surveys. Wait and see, one might say - in the end, we also have to act according to what the current health situation allows and what decisions are made by politicians.

The Interview was conducted by Ines Chucholowius,
Managing Partner, Textination GmbH

When it comes to the future of motorized mobility, everyone talks about the power drive: How much e-car, how much combustion engine can the environment tolerate and how much do people need? At the same time, new powertrains place ineased demands not only on the engine, but also on its housing and the car body: Carbon fibers are often used for such demanding applications. Like the powertrain of the future, the materials on the vehicle should also be environmentally friendly. That is why recycling of carbon fibers is required. Institutes of the Zuse Community have developed solutions for this.

Carbon fibers consist almost completely of pure carbon. It is extracted from the plastic polyacrylonitrile at 1,300 degrees Celsius, using a lot of energy. The advantages of carbon fibers: They have almost no dead weight, are enormously break-resistant and sturdy. These properties are needed, for example, in the battery box of electric vehicles in structural components of a car body.

The Saxon Textile Research Institute (STFI), for instance, is currently working with industrial partners on combining the static-mechanical strengths of carbon fibers with vibration damping properties to improve the housings of electric motors in cars. The project, which is funded by the German Federal Ministry for Economic Affairs and Energy, is aimed at developing hybrid nonwovens that contain other fibers, in addition to carbon fiber, as a reinforcement. "We want to combine the advantages of different fiber materials and thereby develop a product that is optimally tailored to the requirements", explains Marcel Hofmann, head of department of Textile Lightweight Construction at STFI.

The Chemnitz researchers would therefore complement previous nonwoven solutions. They look back on 15 years of working with recycled carbon fibers. The global annual demand for the high-value fibers has almost quadrupled in the past decade, according to the AVK Industry Association to around 142,000 t most recently. "Increasing demand has brought recycling more and more into focus", says Hofmann. According to him, carbon fiber waste is available for about one-tenth to one-fifth of the price of primary fibers, but they still need to be processed. The key issue for the research success of recycled fibers is competitive applications. STFI has found these not only in cars, but also in the sports and leisure sector as well as in medical technology, for example in components for computer tomography. "While metals or glass fibers cast shadows as potential competing products, carbon does not interfere with the image display and can fully exploit its advantages", explains Hofmann.
 
Using Paper Know-How
If recycled carbon fibers can pass through the product cycle again, this significantly improves their carbon footprint. At the same time it applies: The shorter the carbon fibers, the less attractive they are for further recycling. With this in mind, the Cetex Research Institute and the Papiertechnische Stiftung (PTS), both members of the Zuse Community, developed a new process as part of a research project that gives recycled carbon fibers, which previously seemed unsuitable, a second product life. "While classic textile processes use dry processing for the already very brittle recycled carbon fibers in fiber lengths of at least 80 mm, we dealt with a process from the paper industry that processes the materials wet. At the end of the process, in very simplified terms, we obtained a laminar mat made of recycled carbon fibers and chemical fibers", says Cetex project engineer Johannes Tietze, explaining the process by which even 40 mm short carbon fibers can be recycled into appealing intermediates.

The resulting product created in a hot pressing process serves as the base material for heavy-duty structural components. In addition, the mechanical properties of the semi-finished products were improved by combining them with continuous fiber-reinforced tapes. The researchers expect the recycled product to compete with glass-fiber-reinforced plastics, for example in applications in rail and vehicle construction. The results are now being incorporated into further research and development in
the cooperation network of Ressourcetex, a funded association with 18 partners from industry and science.

Successful Implementation in the Automotive Industry
Industrial solutions for the recycling of carbon fiber production waste are being developed at the Thuringian Institute of Textile and Plastics Research (TITK). Several of these developments were industrially implemented with partners at the company SGL Composites in Wackersdorf, Germany. The processing of the so-called dry waste, mainly from production, is carried out in a separate procedure. "Here, we add the opened fibers to various processes for nonwoven production", says the responsible head of the department at TITK, Dr. Renate Lützkendorf . In addition to developments for applications e.g. in the BMW i3 in the roof or rear seat shell, special nonwovens and processes for the production of Sheet Molding Compounds (SMC) were established at TITK. These are thermoset materials consisting of reaction resins and reinforcing fibers, which are used to press fiber-plastic composites. This was used, for example, in a component for the C-pillar of the BMW 7 Series. "In its projects, TITK is primarily focusing on the development of more efficient processes and combined procedures to give carbon fiber recycling materials better opportunities in lightweight construction applications, also in terms of costs", says Lützkendorf. The focus is currently on the use of CF recycled fibers in thermoplastic processes for sheet and profile extrusion. "The goal is to combine short- and continuous-fiber reinforcement in a single, high-performance process step."

1) Since February 1st, 2021, Dr.-Ing. Thomas Reussmann succeeds Dr.-Ing. Renate Lützkendorf, who retired 31 January.

Things can only get better

At the turn of the year, the German Economic Institute (IW) traditionally asked German associations about their economic expectations for the coming year. Most industries are reporting incisive difficulties and are hoping for an improvement in 2021. However, many companies will cut jobs - especially where there were have been already problems before the pandemic started.

At the end of the year, the German economy looked back on one of the most difficult years in recent history. The Covid-19 pandemic already hit many companies in spring 2020, and the current winter and the second wave have put struggling sectors under further strain. It is still not possible to predict when the situation will noticeably improve. This is also reflected in the traditional IW association survey: 34 of 43 associations interrogated reported a worse economic situation than the year ago. Those reporting an improved or unchanged position were often already in a difficult economic situation in the previous year. These include, the automotive and chemical industries respectively.

Four out of five companies in Germany at the turn of 2020/2021 judge the mood even worse than a year before. This crisis-prone initial position partly explains in general optimistic business expectations for 2021. According to the IW’s association survey, higher economic activity is expected in 26 of 43 sectors. By contrast, 13 associations expect a decrease in production in 2021. While there is a moderate recovery in investments overall, employment is expected to decline further in 23 sectors.

Looking ahead to 2021, the IW Association Survey is dominated by confidence. This is not surprising understanding this confidence as an improvement on the crisis year 2020. The expected increases can be explained having the massive drop in view as well as a poor starting point in 2020. For a number of companies and entire industries, this hopeful outlook for 2021 does not necessarily mean a return to pre-crisis production levels. The IW business survey with more than 2,200 companies conducted in November 2020 consistently shows, that around half of the companies surveyed still expect shortfalls in production by 2022 compared to the pre-crisis level (IW Research Group Macroeconomic Analysis and Business Cycle, 2020).

Textile industry and banks particularly pessimistic
After all, most associations are confident with a view to 2021, expecting their situation to improve - although the pre-crisis level is not yet in sight for many sectors. 26 associations are planning increased production for the coming year. 13 associations - including shipbuilding and marine technology, textile and fashion associations, and the food industry - predict lower production. Banks and construction companies also have subdued expectations for 2021, although the pandemic has had relatively little impact on these industries up to now.

Less jobs in the automotive industry
The outlook for the employment market is less optimistic: Only five of 43 associations surveyed expect their member companies to employ more people in the coming year. This includes the construction industry and handicraft businesses, which already suffered from a shortage of skilled workers before the crisis. 23 associations expect a reduction in employment, especially for industrial site. Particularly pessimistic are associations with member companies facing structural adjustment burdens in addition to the corona pandemic – like in the area of finance:

In the previous years, fewer and fewer customers used branches of banks. The automotive industry is also planning with fewer employees: In addition to the weak global economy, are strict exhaust emission limits and quotas for electric mobility put companies under pressure. Exports, which are extremely important for the industry, decreased by a similar amount.

The few industry associations whose members - on average across all enterprises and subsectors - are in the same or better position than at the previous turn of the year, are often sectors that were already in a difficult economic situation at the turn of 2019/2020. The automotive industry, segments of the metal and electrical industry as well as the chemical industry point to this. The Covid-19 crisis already records a negative history for parts of the industry. 2019 the downturn in business was partly the result of a cyclical normalization after a phase of high capacity utilization. Above all, protectionism and geopolitical uncertainties weighed on global investment activity, and hit the German industry, which is heavily involved in the international capital goods business. Technological challenges - due to digitization and climate change for example - also created adjustment burdens.

As a result of the Corona pandemic, the PERFORMANCE DAYS fair on December 9^th - 10^th and the accompanying sustain&innovate conference for sustainability on December 10 could only take place in digital form. Nevertheless: exhibitors, visitors and partners can look back on a successful event. The focus topic “Nothing to Waste – Closing the Loop“ relating to the issue of the textile circular economy in the course of the sustain&innovate conference also provided great discussion material while generating a positive response.

The PERFORMANCE DAYS team also expresses its satisfaction. Because despite the event being solely a digital event on the 9^th and 10^th of December 2020, an estimated 15,000 participants made extensive use of the comprehensive online offerings of the 191 digital exhibitors, among them drirelease/OPTIMER, Merryson, Stotz, HeiQ, Schoeller Textil, Long Advance, Dry-Tex, Utenos, Fidlock, Cifra, dekoGraphics and Jia Meir, during the week of the fair. The popular “Contact Supplier” function was supplemented with a new online tool that allows exhibitors to be contacted directly via chat, call or per video. A total of 3,250 fabric sample orders were placed with exhibitors. The variety on offer included fabric innovations for Autumn/Winter 2022/2023 within the top class PERFORMANCE FORUM and an extensive digital supporting program via live-stream with informative webinars, talks and rounds of discussions. Best of all: the resulting videos will be available on demand on the PERFORMANCE DAYS website free of charge.  
 
Finally standard: PERFORMANCE FORUM with sustainable materials
Innovative, sustainable and cutting-edge: the 240 fabrics plus accessory trends at this year’s PERFORMANCE FORUM impressed throughout with exciting environmentally conscious solutions. Natural fibers such as hemp, organic cotton, bamboo, wool or coconut shell remain in demand, while manufacturers are also increasingly refraining from the use of environmentally harmful chemicals, avoiding microplastics, advocating natural dyeing processes and either trying to return fabrics to the cycle, recycle plastic and other waste in order to produce fibres in such a way that they are biodegradable. This environmental awareness is also reflected in this year’s FOCUS TOPIC – so here the 24 best fabrics not only score in terms of sustainability, but also demonstrate that they are both functional and can be returned to the textile cycle, true to the motto “Nothing to Waste – Closing the Loop.   

In the Marketplace section, visitors have the opportunity to view more than 9,500 exhibitor products, including the fabric highlights of the individual categories of the PERFORMANCE FORUMS. In order to be able to digitally present the fabrics to visitors as realistically as possible in terms of feel, design and structure, the Forum has been equipped with innovative 3D technology, including innovative tools such as 3D images, video animations and U3M files for download.  

From fiber to fiber: successful sustain&innovate conference generates discussion  
Textile circular economy is considered part of the solution to the global waste problem, curbing the consumption of resources and reducing climate damaging greenhouse gases. But what exactly is the circular economy and how can it succeed? Most importantly, how far are fiber manufacturers in developing mono-component fabrics that can eventually be returned back into the textile cycle?    
The Focus Topic of this year’s sustainability conference, launched in cooperation with SPORTSFASHION by SAZ, offered a platform for discussion and strove to enlighten with evocative talks, discussion rounds and webinars. Christiane Dolva, Head of Sustainability at Fjällräven, got to the heart of the matter at the start of the expert talks on the second day of the fair, outlining how important emotional consistency is for the brand itself and ultimately also for the consumer – especially when it comes to textile recycling. Durability, good quality, in combination with timeless design are more important than ever today and in the future in terms of sustainable action. Added to this is the possibility of reviving products by means of a repair service. Equally exciting: the development of new technologies in terms of recycling. Erik Bang from the H&M Foundation provided a first glimpse of the new Greenmachine, which should make it possible to separate mixed fabrics such as cotton and polyester as early as 2021. Alternatively, old clothing is converted into new fibres thanks to companies such as WornAgain, Re:newcell, Spinnova or Infinited Fiber, which soon promises to be more than just a mere vision. For those who wish to gain insight into the supply chain of their purchased garment, the start-up know your stuff lets customers track the journey of the respective garment by simply scanning a QR code on the garment in a store or online.    
 
Free extensive retrospective
The next edition of PERFORMANCE DAYS is planned as a hybrid fair and will take place on May 19^th and May 20^th, 2021 in Munich as well as online. Until then, the PERFORMANCE DAYS platform will remain accessible, for instance with the Marketplace and further inspiring topics of (video) material stories to make online sourcing even easier. The talks from the first day of the fair and the conference will be accessible free of charge on the fair website.

The most importantt links:
Highlights of Expert Talks & Webinars
https://www.performancedays.com/digital-fair/expert-talk-webinar.html

Marketplace:
https://www.performancedays.com/marketplace.html

3D-Forum:
https://www.performancedays.com/digital-fair/forum-highlights/3d-forum.html

PERFORMANCE COLORS by Nora Kühner
https://www.performancedays.com/digital-fair/color-trends.html

The recently launched 6.1 million Euro project INNO4COV-19, funded by the European Commission (grant agreement no. 101016203), will support the marketing of new products to combat COVID-19 over the next two years, throughout Europe. The Fraunhofer Institute for Organic Electronics, Electron Beam and Plasma Technology FEP is contributing its know-how in sterilization using accelerated electrons and on near-to-eye visualization.

The €6.1 million project INNO4COV-19 is committed to supporting the commercialization of new products across Europe for combatting COVID-19 over the next two years. Looking for the fast development of products – from medical technologies to surveillance solutions - the project will boost innovation to tackle the new coronavirus, reinforcing Europe's technological leadership, and invigorating an industrial sector capable of protecting citizens' safety and well-being.

Officially starting on October 1, the virtual kick-off took place on October 6 – 7, counting with the support of two European Commission officers.

The 11-partner consortium led by INL – International Iberian Nanotechnology Laboratory, is looking for efficient and fast solutions that can help in the fight against COVID-19 jointly with the other actively involved industrial and RTO partners.

The mission of INNO4COV-19 is to create a “lab-to-fab” platform and a collaboration resource where companies and reference laboratories will find the tools for developing and implementing innovative technologies – from idea assessment to market exploitation. This work will be carried out as part the European Union Coronavirus initiative and in strong collaboration with all the funded projects where to accelerate the time to market for any promising product.

INNO4COV-19 is set to assist up to 30 test cases and applications from several areas spanning from Medical technologies, Environmental Surveillance systems, Sensors, Protection of Healthcare workers and Artificial Intelligence and Data mining. To achieve this, INNO4COV-19 is awarding half of the budget to support 30 enterprises selected through a set number of open calls during the first year of the project.

The first call will be launched in November 2020 across several platforms. Awardees will receive up to €100,000 each and benefit from the INNO4COV-19 consortium's technical, regulatory, and business expertise.

Roll-to-Roll Equipment and Electron Beam Technology for Large Area Sterilization of textile materials
During pandemic events like COVID-19, MERS, SARS or Ebola a substantial shortage of sterile materials for medical uses was observed due to peak demands. Fraunhofer FEP will contribute their roll-to-roll equipment and electron beam technology for the purpose of large area sterilization of textile materials to the INNO4COV-19 project.

Usually the textile material is produced in non-sterile conditions and therefore must be sterilized before being delivered to the consumers (e. g. hospitals); Sterilization at product level (sterilizing the final manufactured masks) is limited in throughput, due to a high number of individual small pieces, that must be sterilized.

Project manager Dr. Steffen Günther of Fraunhofer FEP explains the role and aims of the institute in more detail: “INNO4COV-19 will establish and verify a process chain for high throughput (4500 m²/h) electron beam sterilization of fabric material in roll-form in a single TRL 7 pilot machine to allow efficient manufacturing of sterile face masks and other fabric based sterile products without the need to sterilize the final product.”

OLED Microdisplays for Detecting Infected People
Another topic of Fraunhofer FEP within INNO4COV-19 deals with the earliest possible detection of infected people. A widely used strategy to early identify individuals with disease symptoms is body temperature screening using thermal cameras.

One possibility to allow continuous body temperature monitoring, is the integration of a thermal camera into a smart wearable device. Therefore, Fraunhofer FEP is using their OLED microdisplay technology. This allows small (< 3 × 2 cm²), ultrathin (< 5 mm including control circuitry) and ultra-low power (< 5 mW) devices to show visual information. In combination with an infrared sensor a thermal imager will be realized to both measure body temperature and directly displays the result via near-to-eye visualization. The system can be embedded within smart glasses, hats, caps or personal face shields.

About INNO4COV-19 project:
Website: www.inno4cov19.eu
Please contact: info@inno4cov19.eu

 

The Carl Meiser GmbH & Co. KG - started in the early 1950s as a day- and nightwear manufacturer. Over the last 20 years the company has become a specialist in the field of technical textiles. With its brand nopma Technical Textiles the company is present as developer and producer of textile solutions via coatings. The main products are nopma anti-slip - textiles with anti-slip effect, nopma adhesion - adhesive pre-coated films, spacer fabrics and substrates for lamination in automotive interiors, nopma ceramics - abrasive more resistant textile surfaces and nopma silicones - silicone coatings on textile surfaces.

Textination talked to the managing director, Jens Meiser, who joined the company in 2005, realigned the division and developed it into a service provider, about his plans and objectives.

Founded in 1952, Carl Meiser GmbH & Co.KG has changed from a day- and nightwear manufacturer to an innovator in the field of technical textiles, presenting themselves as a specialist for plastic-based coating processes. If you had to introduce yourself in 100 words to someone who does not know the company: What has influenced you most in this development process and what makes you unique?
Innovation is the new normal - This has been true for the textile industry not just since Sars CoV-2. Our industry was one of the first to be disrupted in the early 1990s and has always been subject to constant change. This urge for further development, which is essential for survival, has left its mark on us intensively and has enabled us to manage huge leaps in innovation in recent years

Today we regard ourselves as an innovative development and production service provider with a focus on textile coating. We develop and produce almost exclusively customized special solutions.

Through the combination of coatings on textiles these hybrid materials receive completely new properties.

You manufacture exclusively at your location in Germany. Why? Have you never been tempted to set up subsidiaries in other countries, for example to benefit from lower wage levels?
Today we supply global supply chains from our headquarter in southern Germany. Although we produce in a high-wage country, much more important for us are know-how and the drive of our team to create something new. Globalization will continue to be the key to success in the future. Therefore, subsidiaries in North America and Asia could be very interesting for us in the medium- and long-term perspective. However, this is still too early for us.

You use CIP and Kaizen techniques intensively in your company. How did a Japanese concept come about in the Swabian Alb?
KAIZEN, the change for the better, are actually German virtues. The urge to improve and optimize things is in all of us. Due to the continuous improvement process we do not stand still but evolve constantly. Besides, there is the personal affinity to Japan. A look at another culture simply opens the horizon. And if you additionally recognize parallels in the working methods, it’s even better. 

10 years ago, you turned your attention to new markets: aviation, automotive, protection, caravan and furniture manufacturing, to name just a few. Some of these segments have collapsed significantly during the Covid 19 pandemic. What market development do you expect in the medium term and what consequences will this have for your company?
Of course, the aviation or automotive industry, for example, have substantial problems during or due to the Covid-19 pandemic. Quite honestly, many of these problems existed before. They were further tightened, as if a fire accelerator has been used. Of course, these cut-backs are also hitting us hard economically. But we are pursuing long-term goals. As a medium-sized company, you have to have the resilience to continue on your path. Thanks to our specialisation and the split of our industrial sectors, which we drive forward every day, we manage to decouple ourselves more and more from economic developments in individual industries. For our customers this is a great advantage of relying on a very stable partner with long-term orientation.

We are positive about the future. Megatrends like sustainability, digitization and ongoing globalization will lead to new business models in the above-mentioned sectors, as in many others, and to renewed growth. Our coatings on textiles and flexible woven materials can contribute a wide range of solutions to this. If, for example, materials become lighter with identical usage properties or suddenly become biodegradable, because of biodegradable plastics, many new opportunities will arise.

Tailor-made instead of solutions for major customers: The topic of individualization down to batch size 1 is making up a large part of the discussion today. In 2015, you opened a large development laboratory where you have a wide range of testing technologies for textiles and plastics available. What do you think about individual product solutions, and in which application areas have you successfully implemented them?
In principle, we do not use any standards. We live individualization with the smallest possible batch sizes. In our field, we do not manage batch size 1, but we start with MOQs of 300 running meters at process-safe series production. We have very few finished products, and above all we have no collections. Our development laboratory is the key for this. Together with our customers we have the possibilities to realize very lean development processes.

Even on a laboratory scale, we can develop and test new products within just a few hours. We then strive to scale up to production at a very early stage in order to obtain production series results. This way, we offer our clients speed and power that represent a special potential for our partners.

You register important input factors in the production process and evaluate them in monthly environmental analyses. What are these factors in concrete terms and to what extent have their analyses already changed production operations? How do you define environmental management for your company?
For us, environmental management means a holistic approach. In principle, we operate production units and manufacture products that consume many resources. Due to the high production volumes, this continues to accumulate. Because of this, it is self-understanding that we record and evaluate our input and output flows and derive measures from them. This makes economic sense, but is also necessary because of our responsibility for our environment. Specifically, these are energy consumption values, consumption data of primary chemicals, electricity load peaks, our Co2 footprint, just to name a few. This consideration has changed us in many areas. Today we operate a power plant with gas condensing technology, our free roof areas are greened or carry photovoltaic modules, we offer our employees and visitors electric filling stations and finally we have converted the entire power supply of our factory to environmentally friendly hydroelectric power.

With nopma, you have been building up a brand for the technical textiles industry since several years and communicate this via an Individual website parallel to Carl Meiser GmbH & Co. KG. How did this brand name come about and what is the product portfolio behind it?
This is the name of a first technical textile product from the 1990s. It was a textile - coated with dots. Dots on a knitted fabric. NOPMA. My father created this brand.

In 2016 you invested in an additional production line for nopma products and were able to start a directly serial delivery in the NAFTA area. How do you currently assess the market opportunities for North America and Mexico?
We continue to see opportunities in globalization and thus on the North American market also. However, these markets are still severely affected by the pandemic and there are major distortions. When these return to normal, we surely will see more success on these markets again.

As an innovation leader, Meiser offers solvent-free PU adhesive systems as pre-coatings for lamination. How do you assess the importance of such innovations in the context of REACH?
These innovations offer our customers the opportunity to decouple themselves from the pressure REACH triggers in some industries. However, we also have some products that have been developed newly in recent months. This keeps us busy, but also creates opportunities to open up new market segments.

How have you felt about the corona era to date - as a company and personally? What would you on no account want to go through again and what might you even consider maintaining on a daily basis?
I think this time has also strengthened us as a society, as people and even as entrepreneurs. Each crisis you go through makes you a little more relaxed for the unforeseen, but also more motivated to achieve your goals. In my opinion, there have been a lot of positive things in the last few months. Suddenly, for example, digitalization tools have become accepted in our everyday lives, and I feel that people are paying more attention to others again. Hopefully this will stay this way.

The futuristic "tube" escalator at the Elbphilharmonie Concert Hall is just as impressive as the building itself and the longest escalator in western Europe. In August, a start-up based in Cologne installed an UV technology that keeps the handrails clean at all times. At the same time, you presented an antiviral functional coating that can be applied to all textiles in the form of yard goods. How does this work and for what purposes will this technology be suitable?
We have already been working with antimicrobial finishing techniques for many years. This already started with the swine flu in 2009/2010, when we made initial contacts with a young start-up and launched a development. Due to a lack of market interest, however, this had to be discontinued after a few months. Today we are experts in the field of "antimicrobial equipment by means of coatings". We were also able to build up an enormous amount of knowledge on the subject of approval and biocide regulation. Today, we can support our customers holistically in these areas. The function by skin-compatible active substances from the cosmetics sector with a vesicle booster can kill viruses and bacteria within a few minutes.
Since the pandemic has shown us the enormous importance of a new level of hygiene, the applications are very diverse and differentiated. We have already realized the use in personal protective equipment, work furniture, vehicles and for example gloves. In principle, every application is predestined where textile carriers are exposed to many touches by different persons in high frequency. Here our nopma products offer a new level of protection and hygiene.

To break new ground means decisiveness, overcoming fears - and thus the courage to fail. Not every project can succeed. In retrospect - about which entrepreneurial decision are you particularly glad to have made it?
We fail again and again. This is part of the game. But it has never happened that we did not learn anything. The pandemic situation is another good example. In spring we accepted our corporate responsibility for our society and were one of two companies in Baden-Württemberg to achieve certification for FFP protective masks. Since we did not want to participate in the revolver market at that time, we offered these products only to the public sector at favourable pre-crisis prices. However, the decision makers could not make up their minds for weeks and did not order. This disappointed our whole team very much at that time. Today we have overcome this and have taken a lot of knowledge with us from this development.

The interview was conducted by Ines Chucholowius, CEO Textination GmbH

• Interview with Klaus Kottmeier, Elke Giese, Markus Gotta, Prof. Dr.-Ing. habil. Maike Rabe

In June 1988, the shareholders and management of Deutscher Fachverlag announced the Wilhelm Lorch Foundation to the textile and garment industry. Its purpose is to promote vocational training, including student assistance as well as science and research.

Upon its establishment, the Foundation received an initial endowment of DM 300,000 from Deut-scher Fachverlag. Today, the Foundation has assets of approx. 2,85 m. Euro (as at Dec 2019). Since 1988, the foundation has awarded sponsorship prizes of around EUR 1,933,564 (as of June 2020) to date, in order to fund the initial and further training of young people from all areas of the textile industry, with a particular focus on young and up-and-coming talents.

Textination talked to the former chairman of the supervisory board of Deutscher Fachverlag GmbH, the current member of the executive board and founding member of the foundation, Klaus Kottmeier, as well as three members of the board of trustees: Mrs. Elke Giese - trend analyst and fashion journalist, Markus Gotta, managing director of Deutscher Fachverlag GmbH, and Prof. Dr.-Ing. habil. Maike Rabe, who will take over the chairmanship of the foundation board on September 1, 2020, about the challenging task of continuing successfully the foundation's work in an environment characterized by the pandemic.

The figure 3 seems to play a very special role for the Wilhelm Lorch Foundation (WLS). In 1988 announced on the occasion of the 30th Forum of the TextilWirtschaft, it was endowed with assets of DM 300,000. 2019 marked the 30th anniversary of the award of the sponsorship prizes. If you had to introduce the WLS in 100 words to someone who does not know the foundation: Which 3 aspects have particularly influenced its development and made it unique?

Klaus Kottmeier: In more than 30 years the WLS has been in existence, the foundation has received great support all over the sector from the very beginning. This continues to this day and is not only reflected in the financial support provided by generous grants, but above all in an active commitment of many sector leaders on the foundation board and board of trustees. A second aspect is the unique range in the topics of the support, which extends across design, business and technology, covering young talents in retail as well as university graduates, but also involving educational institutions themselves. And thirdly, the motivation of so many applicants we experience every year, who prepare their applications with incredible diligence and thus impressively demonstrate their willingness to perform.

 

The name of the foundation is a tribute to Wilhelm Lorch, the publisher and founder of the trade journal Textil-Wirtschaft and thus of Deutscher Fachverlag, who died in 1966. Which of his characteristics and traits do you still see as exemplary for the next generation in our industry today?

Klaus Kottmeier: We are a publishing media house where professional journalism based on sound research always forms the basis. This is associated with classic values such as entrepreneurial courage and will, diligence and discipline, but also a sense of responsibility and team spirit, which were exemplified by our founder and which still form the culture of our company today. These all are qualities young people should take to heart and which, coupled with a passion for their profession, encourage them to continue on their path.

 

According to its statutes, the primary purpose of the foundation is the awarding of "... awards and prizes to graduates of continuation schools of the German retail textile trade, textile-technical training institutes and [...] for final degree or doctoral theses from universities, as far as these deal with textile topics.” How nationally and internationally does the WLS work?

Prof. Maike Rabe: The prizes are mainly awarded to graduates and applicants from Germany and German-speaking countries, but there are also always talents from Europe, who have close ties to the German market.

Markus Gotta: The focus is clearly on the core market of Germany or Germany-Austria-Switzerland respectively, which we cover with the TW - accordingly, we do not advertise internationally, but there is no exclusion for foreign applicants, the only requirement is that the submitted works and reports must be written in German or English.

 

Over the past 31 years in which the foundation has been awarding prizes to people, projects and works, you have met many young talents who have moved our industry or will certainly do so. Are there any unusual stories or special award winners that have remained in your memory? And how do you assess the development of the applicants' educational level over the years?

Elke Giese: The applicants come from very different schools and universities, differing significantly in their profiles and focus. The demands on teaching have grown enormously, especially as a result of increasing digitization. Since the job profiles in the fashion business are also constantly changing and will continue to be subject to major changes in the future, the challenges for schools and students remain very high.
From each year, particularly talented and creative personalities remain in one's memory. To name one, Elisa Paulina Herrmann from Pforzheim, who was twice among the prize winners in 2017 and 2019 with her bachelor's and then master's thesis. Her ability and originality were overwhelming for the board of trustees. She now creates exclusive knitwear collections for Gucci. Among the young men is Niels Holger Wien, who received WLS funding in 1995. He has been the specialist for color trends and zeitgeist of the German Fashion Institute for many years and is currently president of the world's most important color committee INTERCOLOR.

Klaus Kottmeier: There are many award winners who have subsequently made a great career, to name just one example, Dr. Oliver Pabst, current CEO of Mammut Sports Group AG and WLS award winner in 1994.

 

Due to its proximity to TextilWirtschaft, the foundation is primarily associated with fashion design and topics related to clothing production or marketing. In 2020 you have put Smart Textiles in the virtual spotlight with two project sponsorships. How do you see future topics in the field of technical textiles? Can you imagine creating a new focus on that field?

Prof. Maike Rabe: First of all, the WLS supports talented young people who, thanks to their training, can take up a career in the entire textile and clothing industry. Of course, this also includes the field of technical textiles, which is of great importance in terms of production in Germany being a technological leader. Here the boundaries to clothing are fluid, just think of outdoor or sports equipment.    „    

Klaus Kottmeier: Our excellently staffed board of trustees is open to all innovative topics in the industry. Innovations in the field of technical textiles in particular are important topics for the future. In 2017, for example, the sponsorship award went to the Anna-Siemsen-School, a vocational school for textile technology and clothing in Hanover, through which we supported the procurement of a pattern design software.

 

The Wilhelm Lorch Foundation has set itself the goal of supporting qualified young people in the textile and fashion industry. However, you preclude the support for business start-ups. In times, in which start-ups receive increasing attention not only through corresponding TV formats but also through industry associations, there must be reasons for this. What are they and how do you assess future prospects?

Klaus Kottmeier: Support for business start-ups is precluded by §2 of our statutes, which defines the purpose of the foundation. The WLS is exclusively dedicated to the charitable purpose. Support for start-ups and business start-ups would contradict this. We therefore concentrate fully on the further education of young professionals in the sector and the promotion of educational institutions, from which the entire sector benefits.

Prof. Maike Rabe: WLS funding is aimed at further developing the skills of graduates and young talents from the sector. They should receive specific further training, possibly reach a further academic degree, and also learn in an interdisciplinary manner. All of this benefits the sector as a whole and this is our strict objective.

          
The foundation also promotes the training and further education of young and up-and-coming talents who are already working in the textile retail trade. Grants are available to cover course or study fees for further qualification. The closure of shops caused by the lockdown  during the pandemic hit the stationary retail trade hard, and even today we are still miles away from regular business operations. Against this background, how do you see focused funding opportunities for further training in the e-commerce sector?

Markus Gotta: The topics of stationary retail and e-commerce can't really be separated, both have long since become part of the basic requirements in fashion sales and thus also of the topics of training and further education in general.
 
Prof. Maike Rabe: E-commerce has become an integral part of our industry and is naturally reflected in many grants and subsidies. The junior staff members are allowed to make their own suggestions as to where and how they would like to train. We support this. But we would also like to strengthen the connection between stationary and digital trade in particular. Our prize winners have come up with wonderful concepts for both sales channels, and of course they can be combined.

 

Breaking new ground means willingness to make decisions, overcoming fears - and thus courage to fail. Not every project can succeed. In retrospect, which decisions in your foundation work are you particularly happy to have made?

Markus Gotta: That we implemented the Summer School project last year. We broke new ground with the foundation, and this - in cooperation with the Niederrhein University of Applied Sciences - was very successful.

Elke Giese: Especially in the field of design and creation, it is important to recognize an applicant's future creative potential from the work at hand and the information provided by the applicant. I am therefore always particularly pleased when the board of trustees makes courageous and progressive decisions.    

 

The Wilhelm Lorch Foundation offers project funding of € 10,000 to universities and educational institutions. They do not make any thematic restrictions here, but simply demand that there must be a clear reference to the sustainable further training of young up-and-coming talents in the textile and fashion industry. According to which criteria do you finally decide which project will be funded?

Elke Giese: One criterion is the relevance for future developments in the textile and fashion industry. Projects in recent years have enabled schools and educational institutions to train on laser cutters and 3D printers, for example, but also to purchase modern knitting machines or software programs.

Prof. Maike Rabe: All the projects submitted are evaluated very strictly by the jury's experts using a points-based system. This results in a shortlist which is presented to the board of trustees and intensively discussed by them. In this way, we ensure that all submitted applications are honored and that we then award the Wilhelm Lorch Prize to the outstanding project submissions in a joint consensus. The most important criteria are sustainable teaching of innovative learning content, practical training and the feasibility of the submitted project.

 

There are many different definitions of sustainability. Customers expect everything under this term - from climate protection to ecology, from on-site production in the region to the exclusion of child labor etc. Public procurement is increasingly switching to sustainable textiles. What does this mean for WLS, and what are you doing to promote sustainable thinking and acting, not only among young professionals?

Prof. Maike Rabe: At the foundation, we base our definition of "sustainability" on the 1987 report of the United Nations World Commission on Environment and Development, the so-called Brundtland Commission: "Sustainable development is development that meets the needs of the present without compromising the ability of future generations to meet their own needs". The textile and clothing sector plays a pioneering role as a globally enormously connected industry with complex supply chains, which should definitely also play a model role. We therefore make it a priority for all award winners to observe these criteria and at the same time try to provide a platform for people who, through their work and actions, offer suggestions for improvement or even already implement improvements.

 

Virtual instead of red carpet: Usually the awards are presented in the festive setting of the TextilWirtschaft Forum. In 2020, due to the Covid-19, there was only a digital version in the form of a short film. How important do you consider networking opportunities that arise from meeting influential personalities face-to-face? Or has such a format become obsolete in the age of video conferencing?

Prof. Maike Rabe: It is certainly remarkable what digital event formats can achieve. But one thing doesn't work: spontaneity, personal contact and closeness. Therefor it is a real pity that the Forum had to be cancelled this year due to corona. Especially for career starters, the chance for direct networking is of great value.

Markus Gotta: The need for personal exchange and meetings will continue to be of great importance and demand in the future. And I can say at this point: We are already working on the plans for the TW Forum 2021 as a live and meeting event with the top decision-makers in the sector.

 

In which socially relevant areas do you see a particularly great need for innovation and action during the next five years? What is your assessment that funding - for example from the Wilhelm Lorch Foundation - can provide targeted support for solutions? And what role do the experiences from the corona pandemic play in this assessment?

Prof. Maike Rabe: We don't think in five-year periods, today's world requires much greater agility - this applies to the Foundation as well as to the entire industry. With each award we re-orientate ourselves towards current topics. Topics such as aesthetics, function and innovation will certainly continue to play a major role, as will quality instead of quantity, eco-social justice and customer loyalty. It is also important, however, that our economy, which is strongly supported by medium-sized companies, is clearly perceived by the public and in politics; we still have to work on that.

Klaus Kottmeier: I gladly agree with Prof. Rabe's closing statement. Agility is also of great importance in a media company like ours. We live in a constant transformation process with constant changes that have to be faced. The corona pandemic has shown us very impressively how quickly original plans can become waste. Today, and more than ever before in the future, a constant willingness to change is required, and this applies not only to us but also to our hopeful young employees.
 

The interview was conducted by Ines Chucholowius,
CEO Textination GmbH