From the Sector

Cascale (formerly the Sustainable Apparel Coalition) will host Manufacturer Forum: Shanghai on June 28, part of an annual series of events designed to amplify the voices of manufacturers around the globe. Featuring targeted programming designed to address local challenges faced by manufacturers, the event will highlight solutions provided by Cascale’s Higg Index suite of tools and growing list of impact initiatives. The event takes place at the Shanghai New International Expo Center in collaboration with ISPO Shanghai, the multi-segment summer trade show.

Following successful runs in Bangalore, Dhaka, and Shenzhen, Manufacturer Forum: Shanghai will further facilitate pre-competitive collaboration in order to share best practices and collectively address critical challenges. Keynote speakers include Colin Browne, the organization’s newly-appointed CEO, and Scott Raskin, CEO of Worldly, Cascale’s technology partner and event sponsor.

Reflecting “Catalyst for Change,” the current theme of Cascale’s Manufacturer Forum series, the Shanghai event reinforces the organization’s commitment to support an open exchange between manufacturers and better understand their needs and ongoing challenges to jointly develop solutions.

Over 200 attendees are expected to attend the event, which brings together manufacturers with business leaders and critical stakeholders. Programming will cover a wide range of topics, including what manufacturers need to know about global policy, how strategic partnerships can drive industry change, the evolution of Higg FEM and verification processes, and the latest on decarbonization impacts. To aid goal and target-setting, there will also be dedicated training on setting Science-Based Targets for decarbonization, as part of an evolving and interactive program.

Stratasys Ltd. is announcing updates to several Industrial and Healthcare Business Unit products and Stratasys Direct. These include a new open platform for the F900™ 3D printer, more on-demand 3D printing capabilities and a new high-performance material for its Fused Deposition Modeling line.

OpenAM comes to the F900
Stratasys OpenAM™ is a software application that enables the user to modify machine controls to achieve results beyond standard print settings. Already available for the Fortus 450®mc printer, Stratasys is now making its OpenAM software available for the F900 printer. This will allow for expanded functionality and capabilities and will unlock new materials for F900 users.

New VICTREX AM 200 material for FDM
A new material offering that opens the application potential for demanding industries like aerospace and medical, where material properties are critical components of a 3D-printed solutions. This new high-performance, high-strength, validated material, VICTREX AM™ 200, will be available for the Fortus 450mc and the F900. VICTREX AM 200 is a PEEK-based polymer that is temperature, corrosion, and chemical resistant, with excellent mechanical properties which can be utilized with soluble and breakaway support material.

Carbon Fiber Visual Print Option for the F-Series
Carbon Fiber Visual Print Option is a new 5-slice (0.005”) layer height across the F-123 Series™ line of printers that is coming later this month for FDM®ABS-CF10. It produces a smoother surface finish, to provide the perfect finish when a part’s visual appearance is important to the application. It is built for applications that demand the durability of a carbon-filled polymer, but also requires a visually appealing result without additional post-processing.

F770 adds New Colors
The F770® printer can now print in multiple colors, in addition to its original single ivory color. Six new ASA colors, including red, white, light gray, black, blue, and yellow, will allow for more application versatility with FDM® ASA and ABS-M30 tried-and-true engineering plastics. The new colors enable printing without painting or other post-production marking, allowing parts to be available much faster, increasing productivity.

Somos NeXt Validated for SLA
Somos® NeXt™ is now a validated material for Stratasys NEO® stereolithography 3D printers. Somos NeXt is a resin with superior strength and can be used in automotive and consumer products, along with other applications, including prototyping, to produce durable, accurate and detailed parts.

New GrabCAD Software Print Integration Enhances On-Demand 3D Printing Capabilities
Stratasys has introduced Parts on Demand by GrabCAD, a new integration that synchronizes the company's software platform with Stratasys Direct. This addition allows GrabCAD Print™ customers to access Stratasys Direct’s fleet of 3D printers, allowing for larger and more intricate designs, a selection of more than 50 engineered materials, and the assurance of stringent quality inspections.

RadiciGroup participated in the fifth edition of Phygital Sustainability Expo, an event dedicated to the ecological transition of fashion and design brands through technological innovation, which was held in Rome on 4 and 5 June.

During the narrated fashion show, held ion the 4th of June in the evocative archaeological site of the Imperial Forum Museum, RadiciGroup presented a jumpsuit. The jumpsuit is made of Radilon Chill-fit, an innovative nylon yarn - made by RadiciGroup in its production sites with low environmental impact. It guarantees thermal regulation and ensures freshness and comfort throughout the day. The jumpsuit worn during the day can quickly turn into the "basis" of an elegant evening outfit by simply adding a kimono-dress, made in nylon, to ensure complete future recyclability.

The outfit is the result of the collaboration between RadiciGroup and the designer Anita Bertini, a young designer at POLI.Design (an international reference for postgraduate training at Politecnico di Milano): the goal is to propose a wardrobe made of essential, durable and recyclable garments, which offer endless possibilities of matching without ever compromising personal style and commitment to a better world.

Two companies from the Italian textile scenario collaborated on this project as technical partners: Calzificio Argopi for the creation of the jumpsuit and Erco Pizzi for the kimono-dress fabric.

Tintoria Finissaggio 2000 is one of the most important Italian companies in the textile finishing sector. Founded in 1973 in Masserano in the textile district of Biella, the company offers the complete range of dyeing of all types of fibres, finishing, digital printing, lamination and membrane lining. These processes are used to give fabrics certain properties, such as colour, pattern, softness, shine or waterproofness.

At Tintoria Finissaggio 2000, customers benefit from the fact that all processes are handled under one roof, from design support to the finishing of fabrics, combining decades of experience with the new possibilities of lamination and digital printing. The dyeing plant in Masserano is a state-of-the-art facility that fulfils the strictest environmental standards. In general, Tintoria Finissaggio 2000 continuously invests in state-of-the-art technologies and production facilities in order to achieve high-quality results while ensuring sustainable production processes.

Tintoria Finissagio 2000 also focused on innovation when equipping a new stenter frame. The company opted for the latest development from German machine manufacturer Mahlo GmbH + Co. KG: the Orthopac RXVMC-20 automatic straightening system. The new straightening concept is specially designed for processing textiles with high distortion dynamics, i.e. textiles with highly variable distortion. Two individually controlled and driven straightening modules with a total of three bow and four skew rollers ensure that bow and skew distortions are corrected in small steps. The control concept is also new. A scanner group at the infeed of the straightener detects distortions even before they reach the correction rollers. This means that the rollers are brought directly into position and the fabric is corrected from the very first centimetre. A scanner group at the outfeed also recognises any residual distortion, which is then corrected on the second straightening module.

Polyurethane has become an integral part of our daily lives, whether in the construction industry, in leisure activities, in the manufacture of furniture or in numerous other applications. The precision gear pumps from Oerlikon Barmag, which will be presented at this year's UTECH Asia / PU China 2024 in Shanghai, impress with customised solutions for demanding tasks in the chemical industry. They increase the productivity of the often complex manufacturing processes for this wide range of applications.

Oerlikon Barmag pumps handle demanding processes in PUR applications, in the chemical, plastics or paint and lacquers industries. One of the greatest challenges lies in the accurate and reliable metering of toxic or low-viscosity media. With the GM and GA series and the associated components, Oerlikon Barmag presents the optimum equipment for these applications.

GM pump
Pumps in the GM series achieve precise dosing by feeding the flow with low pulsation. The multi-stage GM pump conveys low-viscosity media even under high pressure and the most difficult operating conditions (e.g. 250 bar, 100 mPas). The standard pump for many dosing tasks is the GM series in a square design. With the development of the multi-stage pump, the range of applications for the GM series has been significantly expanded. The round 2-stage GM pump has been specially developed for use in high-pressure technology. It fulfils the special challenge of pumping small flow rates with low viscosities. The pump serves flow rates from 0.05 to 20 ccm/rev and is therefore particularly suitable for the production of PUR moulded parts, block foam, refrigeration unit insulation or sandwich panels.  

GA series
Making products and processes more efficient is a constant challenge for manufacturing companies. This is why Oerlikon Barmag has added the GA series to the GM series especially for the demanding conveying of high-viscosity media. The GA series is available in delivery volumes of 1.25 - 30 cm³/rev (0.6-144 l/h). It is designed for pressures up to 200 bar, for viscosities up to 1,500 Pas and for temperatures up to a maximum of 225°C. With this pump series, Oerlikon Barmag offers customised solutions for process engineering processes where highly accurate and uniform metering is required.

The drum pump
The drum pump from Oerlikon Barmag is specially designed for conveying and dosing highly viscous materials such as adhesives, silicones and other highly viscous materials from drums and other large containers and for pressures of up to 250 bar. One of its special features is not only that it discharges highly viscous materials from the drum, but also that the medium can be dosed directly without an intermediate stop.

The gear pump and drum follower plate are synchronised so that the plate effortlessly reaches the bottom of the container, leaving behind only a very small residual quantity of < 1%. This reduces material costs and has a positive effect on the production process.

KM.ON launches its new Quality Monitoring System (QMS) for the retrofit market at ITM from June 4 to 8 in Istanbul, presenting a solution for quality management on warp knitting machines.
For its performance in defect detection, the QMS uses the advances of our time: a camera system that captures images of the production process, and a specialized artificial intelligence (AI) to analyze the images. Particularly in terms of handling, reliability and precision of defect detection, the QMS from KM.ON offers advantages over conventional systems that do not rely on AI analysis.

The QMS is designed for easy setup and can be operated without prior expertise. If a defect causes the machine to come to a standstill, the operator is informed immediately via a user-friendly interface. The immediate warning enables rapid intervention and therefore less downtime and more productivity.

Thanks to its conceptual design, the QMS only stops production when actual defects are detected. Unnecessary interruptions caused by external disruptive factors, such as changing light conditions, are avoided. This precision prevents productivity losses and helps to ensure continuous operation. Costs due to unnecessary machine downtime are avoided.

Unlike conventional camera systems, the QMS detects even the most complex defects and triggers an immediate machine stop. This minimizes material waste. During operation, the AI-controlled system learns from the data to enhance its detection accuracy, thereby reducing the reject rate and costs. The QMS also adapts to evolving production environments to ensure consistently high efficiency.

British technology company Hypetex has been awarded a significant grant from Innovate UK to develop the world’s first technical coloured flax fibre, which will have applications in the sustainable manufacturing of cars, boats and other products that are usually made with carbon fibre.

Called FlaxTex the material is strong, lightweight and 100 per cent biodegradable, having a net positive carbon footprint at point of manufacturing. It can be colourised whilst enhancing its performance properties, with the process adding some important manufacturing attributes compared to standard flax fibre.

As such, FlaxTex’s mechanical properties represent the closest sustainable substitute for robust and lightweight materials like glass fibre and carbon fibre in composite structures.  

The performance of standard flax fibre is often hindered by its high moisture absorption, resulting in reduced structural integrity when used in composite construction. In addition, the natural brown colour of flax has been deemed unappealing for product use.

Flaxtex solves these issues by removing moisture through the colouring process and sealing the fibres, which waterproofs them and enabling their core mechanical properties. Hypetex’s patented nano-pigment technology changes the colour adding an aesthetic quality to the material.  

This colouring process is set to transform industrial design possibilities of Flax natural fibres by enhancing the strength and performance while simultaneously reducing post-processing requirements and total energy usage. This also aligns with Hypetex's commitment to supporting the green transition and helping manufacturers meet government expectations on the path to UK Net Zero targets and the European Green Deal.

Over the course of a 12-month industrial research project, Hypetex will further optimize its resin systems and processes, expanding the use of FlaxTex across various markets.  

FlaxTex has a range of industry uses, including on construction, automotive, sports equipment and furniture products.

Flat knitting technologist SHIMA SEIKI MFG., LTD. of Wakayama, Japan, together with its Argentinian representative TEMCO ARGENTINA S.A., will participate in the SIMATEX exhibition in Buenos Aires, Argentina (21st - 23rd May 2024).

SHIMA SEIKI will exhibit a wide range of products, including proposals in seam-free WHOLEGARMENT® knitting technology as an alternative to labor-intensive manufacturing in the South American market. Three MACH2®VS machines, capable of knitting WHOLEGARMENT® knitwear using every other needle, will be shown in 12, 16 and 18 gauge. N.SVR®122, shown in 5 gauge, is the industry benchmark for shaped knitting, featuring such innovations as the R2CARRIAGE®, WideGauge® knitting, spring-type moveable sinkers, DSCS® Digital Stitch Control System, stitch presser, yarn gripper and cutter, and takedown comb.

Demonstrations will be performed on SHIMA SEIKI's SDS®-ONE APEX4 design system. SDS®-ONE APEX4 provides support throughout the supply chain, integrating production into one smooth and efficient workflow from yarn development, product planning and design, to machine programming, production and even sales promotion. Especially effective is the way SDS®-ONE APEX4 improves on the product planning and design evaluation process by replacing physical samples with digital prototypes based on photo-realistic simulations. These virtual samples realize significant savings in time, cost and material, contributing to sustainable manufacturing.

adidas introduces its 15-piece SS24 Paris Collection ahead of the 2024 clay season. Built to help players adapt to clay court conditions, the collection includes a core 8-piece range of apparel and footwear to help raise awareness of adidas’ annual Move For The Planet activation.

Designed to be played in seasonably warm Parisian temperatures, the collection features HEAT.RDY technology – breathable and lightweight fabrics that maximize airflow, to help keep players feel comfortable on court. Meanwhile increased mobility is unlocked thanks to adidas’ FreeLift Construction – a paneled fabric structure under the armpits – that enables greater freedom of arm movement during play while preventing the hems from riding up.

The pieces have been intentionally paired back, using zero prints to allow other bolder design features to make maximum impact, through striking color blocking, engineered paneling and textured fabrics. White and black panels on the garments emulate classic tennis court lines, highlighted by black bonding seams, meanwhile a stimulating Orange ‘Spark’ is used throughout to foster a sense of joyful energy for players during high-pressure games.

The collection will be worn by athletes including Caroline Wozniacki , Elina Svitolina, Xinyu Wang, Dana Mathewson, Jessica Pegula, Maria Sakkari, Stefanos Tsitsipas , Felix Auger Aliassime, Jason Wu and Martin de la Puente.

adidas have unveiled an innovation in the sport of wheelchair basketball. Born from extensive feedback and research with wheelchair athletes, the uniforms were developed by the adidas Innovation team in Portland in close collaboration with Adaptive Sports Northwest, a non-profit organization for adaptive athletics. The uniforms will be worn by the PNW Reign women’s wheelchair basketball team for the first time as they set out on a quest to win the NWBA Tournament on April 26-28, 2024.

Earlier in April, during the reveal of the adidas kits for the Paris 2024 Olympic and Paralympic Games, the sports brand announced that 86% of pieces of apparel worn on and off the field of play have been created using design principles that ensure they work for athletes with and without a disability alongside the development of adaptive training apparel.

The new wheelchair basketball jersey and shorts feature ergonomic advancements in pattern engineering, specifically tailored for seated positions to reduce bulk and increase comfort. Materials were selected based on detailed athlete feedback sessions and data analysis to unlock performance for seated athletes. The uniform features lightweight woven front panels for durability and full mesh back panels for breathability. Focus on the fit was paramount to deliver a uniform that felt light and comfortable.

Players of both genders have actively participated in rounds of feedback and ergometer testing sessions to measure maximum speed over pushes, providing the adidas team with invaluable insights into the mechanics of speed that will inform future research and development. In addition, the feedback was used to measure fit, performance, durability, and overall comfort to make the uniforms match the needed requirements. Finally, through the validation process, the PNW Reign basketball team confirmed that adapted patterns have been proven to reduce fabric bulk, decrease heat build-up and enhance confidence.