From the Sector

KARL MAYER GROUP has developed a sophisticated system for considerable energy savings when operating the cylinder dryers in its PROSIZE® sizing machines and BLUEDYE dyeing plant.

Saving costs with inline energy recycling
The innovation is called CASCADE and focuses on steam as a heating medium in cylinder dryers. And for good reason: according to the IPCC report by ITMF Zurich, one tonne of steam cost between USD 20 and just under USD 27 internationally in 2021. The new solution relies on reuse to reduce the amount of process energy required.
"CASCADE recirculates parts of the process steam in cylinder dryers, enabling genuine, efficient energy recycling within the machine," explains Karl-Heinz Vaassen, Head of Textile Drying at KARL MAYER.
The customer benefits from significantly lower energy costs and CO2 emissions. With a view to the Asian market, a dryer with 14 cylinders and a running time of 7,000 working hours can achieve cost savings of up to USD 17,000 per year.

Precise, real savings values are available when looking at the machine dashboard. A sensor provides real-time data on the amount of steam circulating in the circuit, from which the corresponding reduction in CO2 equivalents can be calculated.

Utilizing the pressure drop
CASCADE reuses part of the invested process energy and uses the flash-steam in conjunction with the pressure ratios, which - nomen est omen - decrease in cascades in the different zones of the cylinder dryer.
The highest working pressure prevails in the first cylinder section. The heat transfer medium steam emits large amounts of energy for yarn drying and condenses without temperature loss.

The resulting hot condensate is not immediately discharged from the machine, but is instead fed into a flash tank, where vapor exhaust is formed as a result of the pressure reduction. In conventional systems, the carrier medium for gases is only created in the return line towards the boiler house and is eliminated as undesirable. Instead of being utilised in the process, it escapes into the environment. With the CASCADE system, this "freshly recycled steam" is used for the heat supply in the second cylinder section, but not without prior treatment.

In the system patented by KARL MAYER, the recycled steam is intelligently mixed with live steam and thus raised to the level of the required process conditions for use in the cylinder section at the end of the dryer. Here, the fabric moisture is reduced to the desired residual value at medium pressure and temperature conditions.

Market launch is underway
CASCADE was filed for patent by the KARL MAYER GROUP. It was published in September 2023.
The innovative solution at no extra charge was presented at ITM 2024 in Istanbul and was a visitor highlight at the KARL MAYER GROUP stand.

From January 2024, CASCADE will be part of the PROSIZE® as standard. The first sizing machine with the upgrade for greater energy efficiency will be delivered in the second quarter of this year. It will go to a manufacturer in Europe. In the next step, CASCADE will be integrated into other dryer types and will also be available for the BLUEDYE.

SHIMA SEIKI MFG., LTD. of Wakayama, Japan will participate in the ITM 2024 International Textile Machinery Exhibition in Istanbul, Türkiye from 4th to 8th June 2024 with a full product lineup.

WHOLEGARMENT® knitting has recently gained heavy interest from the apparel industry due to the shrinking workforce of skilled sewing and linking personnel, as well as for its sustainable benefits by requiring the minimum amount of material to produce one item at a time. SHIMA SEIKI intends to gain even more interest with its new SWG-XR® flagship machine. SWG-XR® features the company's original SlideNeedle™on 4 needle beds for high quality production of WHOLEGARMENT® products using all needles, in addition to a re-designed sinker system and a compact, light-weight carriage featuring 4 systems as well as auto yarn carriers. All contribute to increased productivity as well as increased product range using a wider variety of yarn for supporting knits for all seasons, and higher quality for knitting beautiful fabrics and silhouettes; even items that were impossible to knit before, including punch-lace patterns, variable stitch knitting and intarsia knitting. Setting new standards for the next generation of waste-free, sustainable WHOLEGARMENT® knitting, SWG-XR® at ITM will be shown in 15L. The MACH2®XS WHOLEGARMENT® knitting machine, also with original SlideNeedle™ on four needle beds, will be shown in 8L. Other WHOLEGARMENT® knitting machines include the MACH2®VS V-bed machine for producing WHOLEGARMENT® items using every other needle, shown in 8 and 18 gauges, as well as the compact SWG®091N2 for producing smaller WHOLEGARMENT® items and accessories, to be shown in 10 gauge. An economical proposal in V-bed WHOLEGARMENT® knitting will also be introduced in the form of the N.SVR®183 machine in 24 gauge.

SHIMA SEIKI’s technology in computerized shaped knitting is represented by its N.SVR®122 computerized flat knitting machine in 14 gauge, and features such innovations as the R2CARRIAGE®, WideGauge® knitting, spring-type moveable sinkers, DSCS® Digital Stitch Control System, stitch presser, yarn gripper and cutter, and takedown comb. Also on display will be the SCG®122SN coarse gauge machine in 3 gauge. Automatic seamless glove knitting machines will also be present, including the SFG®20 21-gauge machine, and SFG®-I in 10 gauge.

On the software side, demonstrations will be performed on SHIMA SEIKI’s SDS®-ONE APEX4 design system and APEXFiz® subscription-based design software. Each provides comprehensive support throughout the production supply chain, integrating production into one smooth and efficient workflow from yarn development, product planning and design, to production and even sales promotion. Especially effective is the way the design evaluation process is improved with ultra-realistic simulation capability, whereby virtual samples replace physical sampling, consequently reducing time, cost and material that otherwise go to waste. Digital prototyping using virtual samples on SDS®-ONE APEX4 and APEXFiz® help to digitally transform the fashion supply chain for realizing sustainable manufacturing. SHIMA KnitManager™ knit production management software will also be shown to demonstrate solutions for maximizing productivity through monitoring of machine status and production progress.

ITM, to be held in Istanbul at the beginning of June, will once again see a strong participation of VDMA member companies. Almost 90 exhibitors from Germany will exhibit at the trade fair, most of whom are members of the VDMA. In addition to the VDMA member companies exhibiting with their own booth, numerous VDMA members will be represented in Istanbul via agents. They cover nearly all different machinery chapters with a focus on spinning, nonwovens, weaving, knitting, warp knitting and finishing.

In Istanbul, the VDMA members will show their latest innovations. In technological terms, significant trends are digitalisation and automation. These themes have been present for some time but will continue to play a central role in meeting the challenges for many years to come. Another trend that has also been around for a while is sustainability. Today it is much more than a buzzword: Efficiency in energy, raw materials or water as well as recycling are not feel-good issues but have a real economic and social background.

For the textile machinery manufacturers organised in the VDMA, Turkey is a major trading partner. In 2023, textile machinery and accessories worth approximately 350 million euros were exported from Germany to Turkey, which made Turkey the second biggest sales market for German companies. After three years in which China was the most important supplier of textile machinery to Turkey, Germany has now regained this top position.

Turkey is at the doorstep of Europe, which gives Turkish textile producers a powerful geographic advantage over Asian sourcing destinations. The textile companies in the region have a deep experience and know-how in making the highest quality textile and apparel for leading markets of Europe and employs a young, dynamic, and well-educated workforce.

But ITM is not just a place for visitors from Turkey, as Dr. Harald Weber, Managing Director of the VDMA Textile Machinery Association explains: “It should not be forgotten that ITM not only attracts visitors from Turkey, but also from the Middle East, Central Asia and North Africa. Turkey's proximity to the European Union and its fully integrated textile value chain also make it interesting in terms of the EU's strategy for sustainable and circular textiles and the increasing importance of recycling in the future.”

For Italian textile machinery sector, 2024 has begun without anything seemingly special. The first quarter has seen the orders index, as reported by the Economics Department of ACIMIT – the Association of Italian Textile Machinery Manufacturers – remain stationary compared to the same period the previous year. In absolute terms, the index came in at 61.2 points (basis: 2021=100).

This result is due to entirely different trends between the domestic and foreign markets. On the home front, orders were up 15% compared to the first three months of 2023, whereas orders abroad fell by 4%. The absolute value of the index on foreign markets came in at 59.4 points, in comparison to a 73.9 points in Italy. In both cases, new orders remained well below the numbers recorded for 2021, considered as a base year. During the first quarter, order backlog reached 4 months of assured production.

ACIMIT president Marco Salvadè thus commented the data: “The orders intake for the period from January to March 2024 confirms an overall sense of caution on foreign markets in planning new investments. The global geo-political framework remains complex, and these uncertainties are reflected in the buying decisions of many textile manufacturers. Therefore, our primary markets, which include China, Turkey and India, have failed to record any clear signs of growth in demand.”

On the contrary, domestic orders appear to be slightly on the rise. “Following a sharp decline in 2023, new orders from the beginning of the current year have recovered partially,” states ACIMIT’s president. “However, I don’t believe conditions are yet right for a clear inversion of this trend. Here in Italy as well, many investments remain on hold, awaiting the implementation of Transition 5.0 plan. Subsequently, we’ll be in a position see whether the domestic market will react positively to the adoption of these new measures.”

North Carolina State University’s Wilson College of Textiles has been making inroads challenging the conventional pad finishing process and significantly reducing its environmental footprint in collaboration with Baldwin Technology Inc. Front and center in its finishing lab is Baldwin’s TexCoat G4™ digital finishing system.
 
For nearly 125 years, the Wilson College of Textiles has been a hub of innovation and learning, transforming students into experts in the world of textiles. As the textile industry grapples with sustainability challenges, the college has embraced new technologies and innovations to address the issue head-on.
 
At the forefront of this transformation is the Zeis Textiles Extension for Economic Development, an arm of Wilson College which serves the textile industry’s prototyping and pilot production needs in its five laboratories – spun yarn, knitting, weaving, dyeing and finishing, and physical testing. Collaborations with various textile companies have allowed the university to foster industry partnerships that bring forth groundbreaking ideas.
 
The partnership with Baldwin Technology marks a major milestone for the Raleigh, North Carolina-based college’s efforts to contribute to a more sustainable tomorrow.
 
To tackle the longstanding challenges of unsustainable fashion, NC State has taken the lead in demonstrating to students and industry the transition from the traditional pad finishing process to Baldwin’s TexCoat™ G4 system. It offers an innovative “non-contact” precision spray that significantly reduces water consumption, energy usage and chemical waste.
 
“Instead of needing to take the fabric, dip it into a bath to saturate it, squeeze the excess, dry and cure it, you can now precisely add the exact amount of finish you need on the fabric,” explained Rick Stanford, Baldwin's VP Global Business Development of Textiles. “The TexCoat™ G4 system will reduce the amount of pick-up that’s required to carry the chemical onto the fabric. This will also take a lot less energy to dry the fabric, increasing production speeds.”
 
The adoption of the TexCoat™ G4 system signals a new era for the college, allowing students to actively participate in shaping a sustainable future for the textiles industry. In the global effort to protect the planet and its resources, NC State's Wilson College of Textiles is at the forefront, preparing the next generation of professionals to be the leaders of the sustainable textile movement.

Stratasys Ltd. announced the launch of its Direct-to-Garment (D2G) solution for the J850 TechStyle™ printer, the newest offering in the Stratasys 3DFashion™ direct-to-textile printing technology. The first example of its application is an Urban Tattoo denim collection which will be revealed at the Texprocess exhibition in Frankfurt, Germany on April 23.

The D2G solution is ideal for customization and personalization by enabling the application of full color multi-material 3D print directly on fully assembled garments of various fabric types including denim, cotton, polyester, and linen. It allows fashion brands to facilitate personalized and bespoke designs for customers, including the ability to tailor 3D prints according to individual preferences, sizes, and styles.  

Available in two sizes, the D2G tray kits facilitate the personalization of garments ranging from jeans to jackets, enabling designers and manufacturers to adopt more sustainable practices by reducing material waste. The seamless workflow delivers ease of calibration and compatibility with various garment sizes, streamlining the production process and fostering the creation of unique, personalized apparel.

Demonstrating this innovation, the Urban Tattoo collection showcases the potential and the ease of direct-to-garment 3D printing. Working with noted designers Karim Rashid, Travis Fitch, Zlatko Yanakiev at Meshroom along with Foraeva Studio, this collection shows the transformation of ordinary garments into pieces of wearable art, imbuing them with personal identity and meaning.

Like body tattoos, Urban Tattoos promote a deeper emotional connection, encouraging the upcycling of existing garments and contributing to a more sustainable fashion ecosystem. This aligns with Stratasys’ strategy for Mindful Manufacturing™. Stratasys has been able to create a new collection that will appeal to multiple brands that reach across diverse socio-economic backgrounds.

ACG Kinna Automatic and ACG Nyström – members of TMAS, the Swedish textile machinery association – have delivered the first microfactory for the production of fully finished filter bags to an international filtration industry customer, in cooperation with JUKI Central Europe.

The microfactory’s configuration is based on two separate interconnecting modules – the Smart Filter Line (SFL) and the Filtermaster 2.0. The SFL handles the fabric feeding from rolls and its folding prior to seam construction, which can either be by automatic sewing, welding or with sewing and taping, depending on specifications. Very rapid changeover of the modular seaming methods can be achieved during product changes. The specific size of the now fully-tubular fabric is then precisely cut to size for each individual unit and further folded ready to be fed into the Filtermaster 2.0. The Filtermaster 2.0 then automatically attaches the reinforcement, bottom and snap rings onto the filter tube with a second Juki sewing head on a robotic arm, to form the fully finished filter bag ready for packaging.

Filter bags are employed in a wide range of industrial processes and while they may be largely under the radar as products, they represent a pretty significant percentage of overall technical textiles production.
They are used in foundries, smelters, incinerators, asphalt plants and energy production plants. Other key manufacturing fields – often where dust is generated – include the production of timber, textiles, composites, waste handling and minerals, in addition to chemicals, food production, pharmaceuticals, electronics and agriculture.

As a further example of the scale of the industry and the high volumes of fabrics involved, one supplier has delivered a single order of 30,000 filter bags to be used for flue gas cleaning at a European power plant. The bags can also be anywhere up to twelve metres in length and frequently have to be replaced.

Turkey's leading garment machinery manufacturers and representatives have collaborated with Teknik Fuarcılık for GarmentTech İstanbul Garment, Embroidery Machines Spare Parts and Sub Industry Exhibition to host the first GarmentTech İstanbul Exhibition.

The GarmentTech İstanbul Exhibition will be held at İstanbul Expo Center (IFM) between June 25-28, 2025 and brings together all the technologies used in garment and ready-to-wear production.

The ready-to-wear and garment sector is among the locomotive sectors of the Turkish economy with both employment and export income. With 22 thousand 640 exporters and 42 thousand 434 manufacturers, the sector is among the priority sectors in the country's employment with approximately 700 thousand people working in production. Together with the retail and ready-to-wear sectors, total employment exceeds 2 million.

On the other hand, ready-to-wear and garment sector is the 3rd largest exporter in Turkey. Turkey is the 5th country in the world that exports the most ready-to-wear and garment. In 2023, the sector reached 19.3 billion dollars in exports and has a share of 7.5% in general exports.

Teknik Fuarcılık, which has more than 30 years of experience in exhibition organization and has made the ITM International Textile Machinery Exhibition a world brand, has taken action to make the success achieved by the garment and ready-to-wear sector sustainable. GarmentTech İstanbul Exhibition, which will be organized with the support of the members of the Garment Machinery Advisory Board and in cooperation with the Apparel Automation and Machinery Manufacturers Association (KOMİD), will host professional visitors and global buyers from all over the world.

The press conference of GarmentTech İstanbul Exhibition was attended by members of the Garment Machinery Advisory Board, Vice Chairman of Astaş Holding H. Kaya Aşçı, Astaş Juki Board Member and General Manager Turgay Aşçı, Chairman of the Board of Çatma Makine Yavuz Çatma, Chairman of the Board of Alba Makine Cengiz Albayrak, General Manager of Malkan Makine Alparslan Er, General Manager of Uğur Makine Temel Kamiloğlu, Tetaş Sales and Marketing Assistant General Manager Murat Eren, Malkan Makina Factory Manager Metin Kılıç and KOMID President Haluk Akın, TEMSAD President Adil Nalbant, KOMİD Members Serkon Makina Chairman İzzet Savaş, Robotech General Manager Hüseyin Çetin, Chairman of the Board of NewTech Machinery Nezir Yazıcı, LGM Foreign Trade Specialist Yiğit Sağdık Manav, Avtek Manager Oğuz Avcı and many sector representatives.

SHIMA SEIKI MFG., LTD. of Wakayama, Japan, will together with its Brazilian representative BRASTEMA TECNOLOGIA TEXTIL LTDA. participate in the FIMEC 2024 47th International Fair of Leather, Chemicals, Components, Machines and Equipment for Footwear and Tanneries in Rio Grande do Sul, Brazil from 12th - 14th March 2024.

FIMEC offers the opportunity to reach out to the Brazilian shoe manufacturing industry with proposals for flat knitted fabrics as an alternative to conventional leather. Since participating in FIMEC over the years, SHIMA SEIKI has steadily expanded its market for shoe-upper knitting machines in Brazil. It will be showcasing its latest computerized flat knitting technology to demonstrate how they apply to footwear and other sportswear as well.

The company is showing its new SWG-XR® WHOLEGARMENT® knitting machine for the first time in Brazil. SWG-XR® features 4 needle beds and SHIMA SEIKI’s original SlideNeedle™, capable of producing high-quality fine gauge WHOLEGARMENT® products in all needles, and will be knitting WHOLEGARMENT® sportswear at FIMEC. For conventional shaped knitting, the compact SVR®093 machine with a short knitting width is specially developed for knitting shoe uppers, while the workhorse N.SSR®112 shaping machine features the latest garment knitting technology in an economical yet reliable package.
Both SVR®093 and N.SSR®112 will be knitting shoe uppers at FIMEC while utilizing the R2CARRIAGE®, WideGauge® knitting, spring-type moveable sinker, DSCS® Digital Stitch Control System, stitch presser, yarn gripper and cutter, and takedown comb. The classic SFG® seamless glove knitting machine will be knitting safety-oriented work gloves to round out SHIMA SEIKI’s multi-faceted display.

SHIMA SEIKI’s SDS®-ONE APEX4 3D design system will also be available for demonstrations in design
and simulation suited to shoe production.

Eltex of Sweden, a pioneer in the adoption of electronic sensors by the weaving machinery industry, is marking its 60th anniversary this month.

The electronic detection of broken or missing weft yarns during production was the problem Eltex founders Åke Rydborn and Ragnar Henriksson set out to solve with the development of the world’s first electronic weft-stop-motion. Its potential was recognised on its introduction at the 1963 ITMA exhibition in Hannover, Germany, leading to the foundation of the company in a modest 12-square-metre workshop in Älmhult, Sweden, in February 1964.

By 1968 the company was operating from a modern 3,000-square-metre plant and beginning to establish a global presence, introducing the first all-in-one printed circuit board (PCB) for its sensor systems in 1971. As exports increased, further Eltex operations were established in the USA and Ireland and the company expanded its product range including energy control devices, temperature and humidity loggers, food handling safety systems, and military grade battery chargers. Further textile milestones in parallel to advances in weaving technology included optical arrival detectors for air-jet weaving machines at the beginning of the 1980s, and the QTV system for warp preparation, which introduced digital stop-motion control to the industry at the start of the 1990s. In 2009, the company branched out into carpet tufting, first with the CoTS clamp-on tube sensor for tufting machines, followed by the Compact sensor for tufting machines in 2013. In 2019 the Compact II further cemented the company’s position in this sector.

Newly developed Eltex EyETM and ACT-R
Most recently, Eltex has launched the Eltex EyETM system for the monitoring of yarn tension on warp beams. Not only does it eliminate problems when warping, but also in the subsequent weaving or tufting processes. Eltex EyETM monitors the yarn tension on all positions in real-time and a minimum and maximum allowable tension value can be set. If any yarn’s tension falls outside these values the operator can be warned or the machine stopped.

The Eltex ACT and ACT-R units meanwhile go beyond yarn tension monitoring to actually control yarn tension. This extends the application range greatly. The plug and play system automatically compensates for any differences in yarn tension that arise, for example from irregularities in yarn packages.

Eltex has been owned by Brian Hicks, Seamus O’Dwyer and Jonathan Bell since 2007, following a management buy-out and the subsequent formation of Eltex Global Holdings in Ireland. Today, its head office, Eltex of Sweden AB, is in Osby, Sweden where it provides research and development, administration and global sales for the group. Eltex Manufacturing in Ireland is now the group’s primary production facility and Eltex US, Inc. provides sales and service for North America.