From the Sector

The viscose specialty fibre manufacturer Kelheim Fibres has entered into a collaboration with MagnoLab, an international network of companies in the textile industry based in the Biella region, Italy.

This partnership highlights the importance of collaboration between different companies to drive innovation and sustainability in the textile industry. Kelheim Fibres sees itself not only as a fibre supplier but also as an innovation partner for the entire industry. Through its Open Innovation approach, Kelheim Fibres fosters the exchange of ideas and knowledge to jointly develop sustainable solutions for the future.

Kelheim Fibres operates several pilot and technical facilities itself. The close collaboration with MagnoLab, which boasts an impressive array of state-of-the-art textile machinery, allows for even more efficient research and development.

The cooperation allows for practical testing, accelerating the implementation of innovations. It also contributes to a closer networking of the European (and thus regional) value chain. Thanks to shorter transport routes within Europe, not only is the environmental impact reduced, but also the realization of innovations in Europe is facilitated.

Dr. Marina Crnoja-Cosic, Director New Business Development, Marketing & Communications at Kelheim Fibres, emphasizes the advantages of the collaboration: " Through close networking with the companies organized under MagnoLab, we can produce small quantities of samples and prototypes using various technologies. This enables us to develop solutions based on our specialty fibres that can be directly transferred to our partners' production facilities within the textile value chain."

The international OEKO-TEX® Association, offering collaborative solutions for partners in the textile and leather industry, has once again recorded positive business development. Overall, OEKO-TEX® issued more than 43,000 certificates and labels between July 1, 2022, and June 30, 2023 - an increase of 21% compared to the previous financial year. The MADE IN GREEN product label recorded the strongest growth of 52%. OEKO-TEX® continues to drive urgently needed change through cooperation and joint action - with their services and at the organizational level.

For their two new certifications, OEKO-TEX® focused on cooperation with numerous parties along the global supply chain. Launched in November 2022, OEKO-TEX® RESPONSIBLE BUSINESS addresses the increasing global expectations and due diligence requirements. The tool and certification supports textile and leather companies in preventing negative effects from their own business operations, supply chains and broader business relationships. Companies working with OEKO-TEX® ORGANIC COTTON benefit from a global network of certified companies to facilitate sourcing of chemicals, materials and business partners - from cultivation to finished product.

At the organisational level, OEKO-TEX® is focusing on partnerships with multi-stakeholder initiatives to include as many different perspectives as possible and allow all parties to benefit. Working with ZDHC to promote sustainable chemical management and becoming an ISEAL community member are just two of many collaborations for OEKO-TEX®, which is striving to address the industry's most pressing challenges.

Meanwhile, the Association’s core business advances. For example, based on industry developments and scientific findings, OEKO-TEX® issued a general ban on the use of per- and polyfluorinated alkyl substances (PFAS/PFC) in textiles, leather and shoes certified by STANDARD 100, ORGANIC COTTON, LEATHER STANDARD and ECO PASSPORT. OEKO-TEX® also surpassed the milestone of 1,000 STeP certified production facilities. OEKO-TEX® is in a strong position to continue its work - enabling the industry and consumers to make more responsible decisions through partnership and education.

TRÜTZSCHLER Spinning presents an innovation for the textile machinery market: the high-performance comber TCO 21XL with 12 combing heads. For many decades, eight combing heads has been considered state-of-the-art in the spinning industry. Now, Trützschler’s advanced technology and engineering proves that it is possible to build a heavy-duty comber that maximizes productivity by 50 % and saves space without compromising on quality.

They say two heads are better than one, so just imagine what 12 heads can do! That’s the simple but effective idea behind the TCO 21XL. Increasing the number of combing heads by 50 % makes it possible to increase productivity by 50 %, enabling rates of up to 150 kg/h. As a result, two TCO 21XL combers offer the same production capacity as three conventional combers. And that means companies that buy and operate two machines instead of three can achieve significant benefits in terms of their price-performance-ratio (cost/kg). The costs of running the machines are broken down into 12 instead of eight heads, making the machine more cost-effective over its entire operating life.

50 % higher productivity is great – and it can be even greater if the machine is operated with JUMBO cans. The can changer needs to keep up with the extra performance, and JUMBO cans can easily collect the additional output of the TCO 21XL because they feature a 1200 mm diameter. This makes it possible to minimize non-productive time when changing cans. Anybody who is planning a new spinning mill knows that every square meter of space adds to the overall costs. The new TCO 21XL comber offers huge benefits in this regard because 25 % less floor space is required to operate same number of combing heads. This reduces the initial building costs, while also decreasing operating costs related to lighting, air conditioning and other overheads.

From mechanical engineering to the construction industry, from logistics to rescue technology – tensioning and clamping systems fulfil important tasks in a number of industries. The possible uses of technical textiles for industrial applications of this kind are manifold.

Patented and precisely configured
The ElasTool system from the elastics expert consists of a connection tool and a rubber rope connected to this tool via integrated locking elements. The stainless steel, aluminium or plastic connection tool and the rubber rope – with a thickness of between 12 and 38 mm – are each configured to fit precisely. The highlight of the patented connection solution: the more tensile force is exerted, the more the rope is jammed. Thanks to the locking system, ElasTool still provides a secure hold even when the diameter of the rubber rope narrows to up to 60 percent due to the tensile load. A crucial advantage over conventional end connections by pressing.

Economical and low maintenance
The system has further advantages: the textile solution runs quietly. Unlike clamping systems with steel cable springs, there is no creaking here. In addition, textiles, plastic and aluminium are particularly lightweight materials. ElasTool therefore saves energy. Another benefit: the connection system works without lubricating oil. While conventional tensioning and clamping solutions in industrial plants and products have to be oiled regularly, the JUMBO textile system works completely maintenance-free.

Versatile and easily interchangeable
Depending on the area of application of the ElasTool, the interchangeable head can be exchanged: Plastic hook instead of aluminium eyelet, stainless steel flange instead of aluminium hook – for example. The interchangeable head can be replaced effortlessly and without special tools.

"A lifting system in a high-bay warehouse, a trolley in a crane, damping for compressors or crash systems – these are just three of the many possible applications. We adapt the dimensions, material, force-stretch behaviour, flame retardancy – like all properties – specifically to the respective project," emphasises Carl Mrusek, Chief Sales Officer of JUMBO-Textil. "Thus, with ElasTool, we offer a safe load connection for a wide variety of applications in industry."

ElasTool from JUMBO-Textil

• Lightweight and flexible alternative to conventional tensioning and clamping systems
• Suitable even in small installation spaces
• With individual specifications and infinitely customisable dimensions
• Connection tool optionally made of plastic, aluminium or stainless steel
• Rubber rope in a thickness of 12 to 38 mm
• Rubber rope made of polyamide, polyester, recycled PES, polypropylene, aramid, Dyneema, monofilament, natural fibres
• Different interchangeable head shapes possible
• As an end connection or for coupling with other machine elements
• Tensile load up to 600 N, in individual cases more than this
• Individually configurable e.g. with hook, eyelet or flange

Using recovered resin from discarded car bumpers, Autoneum’s sustainable Re-Liner technology transforms a previously unusable waste product into lightweight and durable wheelhouse outer liners. In addition to their high recycled content, the eco-friendly components require significantly less energy to produce than conventional alternatives. The innovation presents another important step towards a more sustainable circular economy and has now been nominated for the 2023 PACE Award.

Autoneum has been selected as one of the finalists for the 2023 Automotive News PACE Awards. Entering its 29th year, this prestigious award honors superior innovation, technological advancement and business performance among automotive suppliers.

Re-Liner is based on a core of polyolefins recovered from post-consumer bumpers and has a textile top layer made of fibers from recycled materials. “Autoneum has recognized the untapped potential of recovered resin from automotive bumper covers as a resource and is giving this former waste product a second life,” explained Dan Moler. “The core resin of Re-Liner is 100% automotive post-consumer recycled material, not just a filler or additive to a virgin material. Lightweight, durable, and sustainable wheelhouse outer liners based on this technology are expected to reduce waste generated by bumper covers by nearly one million kilograms in 2023.”

For more than a quarter century of a century, the PACE Award has honored innovations driven by automotive suppliers. The award is known in the global automotive industry for identifying and recognizing the latest game-changing innovation: from the plant floor to the product to the showroom. In 2000, Autoneum (then Rieter Automotive) already received a PACE Award for its Ultra-Light technology. In addition, two of the Company’s technologies have also been nominated as finalists in the past: Ultra-Silent in 2010 and Theta-Fiber in 2012.

Devan, part of Pulcra Chemicals, has announced its R-Vital NTL technology.

R-Vital NTL enables textile manufacturers to boost textiles with a versatile range of micro-encapsulated active ingredients. This functional finish provides added value for textiles and allows manufacturers to create products that differentiate them from competitors. Furthermore, the bio-based and biodegradable well-being technology achieves a durability of 50 washes.

The main concept behind micro-encapsulation is that active ingredients, present on textiles, are gradually released on the skin. When using the textiles or while wearing the clothing, the microcapsules burst by friction and release their assets. Since not all capsules break at the same time, a continuous and gradual release of the actives is obtained.

The natural range comprises five distinct products, each with specific attributes:

• Aloe vera: Known for its skin-smoothing and softening properties.
• Avocado seed oil: Known for its skin-moisturizing capabilities.
• CBD: Known for its relaxation properties.
• Multivitamin: A blend of provitamin D, vitamins C and E, and ginger.
• Vitamin E: Known to offer protection against free radicals and premature aging

UK’s Optima 3D is delivering its weaving technology to the USA, for installation at the University of Maine’s Advanced Structures and Composites Center (ASCC).

The 3D weaving system consists of an Optima 3D Series 600 shuttle weaving machine with an integrated 2,688-hook Stäubli SX jacquard and harness. It is also complemented by Optima’s compact warp delivery creel and an associated pirn winder for shuttle bobbins and a spool winder for creel spools.

Optima’s looms offer many advanced features over conventional weaving machines, particularly in terms of versatility, as a result of the comprehensive use of digital control systems allowing rapid parameter and sequence changes, coupled with an innovative shuttle system.

The ASCC is certainly no stranger to advanced technology, or indeed ambitious composite projects – in 2019 it received no less than three Guinness World Records, for the world’s largest prototype polymer 3D printer, the largest solid 3D-printed object, and the largest 3D-printed boat. In its latest project it has further introduced BioHome3D – the first 3D-printed house made entirely with bio-based materials developed in a partnership with Oak Ridge National Laboratory. The 182-square-metre prototype features 3D-printed floors, walls and roof which are fully recyclable and highly insulated with 100% wood insulation and customisable R-values. Construction waste was nearly eliminated due to the precision of the printing process.

Fibre Extrusion Technology Ltd (FET) of Leeds, UK has completed an international series of exhibitions, culminating in a very successful ITMA 2023, the world’s largest international textile and garment technology exhibition, which took place in Milan, Italy in June.

 “This was a very hectic period for FET, organising participation in three exhibitions in Europe and Asia over a period of less than four months” commented FET’s Managing Director Richard Slack. “However, this provides a great opportunity for smaller specialist companies like FET to raise our profile on the international stage, showing what we can offer, alongside major corporations. Being able to meet so many customers face-to-face, post pandemic also indicates a welcome return to normal business relationships.”

Prior to this was INDEX 23 in April, the world’s leading nonwovens exhibition in Geneva. The exhibition season began earlier in the year with the “Green Textile and Innovation Technology Forum and Exhibition” in Hong Kong, taking a small booth to support the event and FET’s official agent in the region, Chemtax.

FET designs, develops and manufactures extrusion equipment for a wide range of high value textile material applications worldwide and the variety of these three exhibitions illustrates FET’s scope in the industry.

The KARL MAYER GROUP is intensifying its business activities in Turkey and is setting up a subsidiary in Bursa. The opening of the new site is planned for October 2023.

The company's success on the market to date has been made possible to a large extent by its close and long-standing cooperation with Erko, the KARL MAYER GROUP's regional representative. The two companies have been cooperating for more than 50 years and see further positive market development in Turkey in the medium to long term.

In order to exploit and shape the potential, they will sharpen the focus of their competences in the Warp Knitting and Warp Preparation Business Units: Erko A.S. will focus on sales, taking advantage of its long-standing regional network. The KARL MAYER GROUP will take over the after-sales service and offer customers a link to the Care Solutions world of the group. Customers benefit from next-level support with many innovative solutions, especially digital ones, for meeting the challenges of our time. At the same time, they can continue to build on the tried and trusted.

The headquarters in Bursa covers just under 1,000 m² on three levels. It offers space for service, an academy with textile samples and a training machine, a workshop for minor repairs and a warehouse for the spare parts business. Located in the top-selling region in Turkey, it is also designed as a contact point for customers.

Thanks to its strong position on the Turkish market, the KARL MAYER GROUP intends to support the companies here, most of which are family-run, in the forthcoming generational changes, and to provide the next generation with specialist support and qualifications.

Freudenberg Performance Materials (Freudenberg) is launching its latest innovation Evolon® Ultra Smooth to serve the specific packaging needs of technical industries.

Evolon® Ultra Smooth fabrics are low-linting, strong and hard-wearing. The new materials are designed for industrial parts and components which require low-friction, sliding behavior during the part packing and handling procedures. Furthermore, they are durably hydrophobic and available in different weights. The reusable textile containers made of Evolon® Ultra Smooth can be used in various industries to pack and transport even very heavy and sensitive parts without damage.

The Evolon® Ultra Smooth materials have a point-sealed patterned white surface which is very different from the standard Evolon® packaging textiles and which makes them easily identifiable.  

Evolon® Ultra Smooth materials protect the surfaces of industrial and automotive parts by avoiding micro-scratches or lint contamination. By using Evolon® Ultra Smooth reusable packaging to transport parts with highly-sensitive surfaces, customers reduce the number of damaged parts and the reject rate. The innovation is available worldwide. As Evolon® Ultra Smooth is 100% made in Europe, European customers benefit from even greater flexibility in the supply chain and quick go-to-market.