From the Sector

Researchers at the ITA, the University of Bonn and Heimbach GmbH have developed a new method for removing oil spills from water surfaces in an energy-saving, cost-effective way and without the use of toxic substances. The method is made possible by a technical textile that is integrated into a floating container. A single small device can remove up to 4 liters of diesel within an hour. This corresponds to about 100 m2 of oil film on a water surface.
 
Despite the steady expansion of renewable energies, global oil production, oil consumption and the risk of oil pollution have increased steadily over the last two decades. In 2022, global oil production amounted to 4.4 billion tons! Accidents often occur during the extraction, transportation and use of oil, resulting in serious and sometimes irreversible environmental pollution and harm to humans.

There are various methods for removing this oil pollution from water surfaces. However, all methods have various shortcomings that make them difficult to use and, in particular, limit the removal of oil from inland waters.

For many technical applications, unexpected solutions come from the field of biology. Millions of years of evolution led to optimized surfaces of living organisms for their interaction with the environment. Solutions - often rather unfamiliar to materials scientists and difficult to accept. The long-time routine examination of around 20,000 different species showed that there is an almost infinite variety of structures and functionalities. Some species in particular stand out for their excellent oil adsorption properties. It was shown that, e.g., leaves of the floating fern Salvinia molesta, adsorb oil, separate it from water surfaces and transport it on their surfaces (Figure 1, see also the video of the phenomon.).

The observations inspired them to transfer the effect to technical textiles for separating oil and water. The result is a superhydrophobic spacer fabric that can be produced industrially and is therefore easily scalable.

The bio-inspired textile can be integrated into a device for oil-water separation. This entire device is called a Bionic Oil Adsorber (BOA). Figure 2: Cross-section of computer-aided (CAD) model of the Bionic Oil Adsorber. The scheme shows an oil film (red) on a water surface (light blue). In the floating cotainer(gray), the textile (orange) is fixed so that it is in contact with the oil film and the end protrudes into the container. The oil is adsorbed and transported by the BOA textile. As shown in the cross-section, it enters the contain-er, where it is released again and accumulates at the bottom of the container. See also the video regarding the oil absorption on the textile, source ITA).
 
Starting from the contamination in the form of an oil film on the water surface, the separation and collection process works according to the following steps:

• The BOA is introduced into the oil film.
• The oil is adsorbed by the textile and separated from the water at the same time.
• The oil is transported through the textile into the collection container.
• The oil drips from the textile into the collection container.
• The oil is collected until the container is emptied.

The advantage of this novel oil separation device is that no additional energy has to be applied to operate the BOA. The oil is separated from the surrounding water by the surface properties of the textile and transported through the textile driven solely by capillary forces, even against gravity. When it reaches the end of the textile in the collection container, the oil desorbs without any further external influence due to gravitational forces. With the current scale approximately 4 L of diesel can be separated from water by one device of the Bionic Oil Adsorber per hour.

• It seems unlikely that a functionalized knitted spacer textile is cheaper than a conventional nonwoven, like it is commonly used for oil sorbents. However, since it is a functional material, the costs must be related to the amount of oil removed. In this respect, if we compare the sales price of the BOA textile with the sales prices of various oil-binding nonwovens, the former is 5 to 13 times cheaper with 10 ct/L oil removed.
  Overall, the BOA device offers a cost-effective and sustainable method of oil-water separation in contrast to conventional cleaning methods due to the following advantages:
• No additional energy requirements, such as with oil skimmers, are necessary
• No toxic substances are introduced into the water body, such as with oil dispersants
• The textiles and equipment can be reused multiple times
• No waste remains inside the water body
• Inexpensive in terms of the amount of oil removed.
• The team of researchers from the ITA, the University of Bonn and Heimbach GmbH was able to prove that the novel biomimetic BOA technology is surprisingly efficient and sustainable for a self-controlled separation and automatic collection of oil films including their complete removal from the water. BOA can be asapted for open water application but also for the use in inland waters. Furthermore, it is promising, that the textile can be used in various related separation processes. The product is currently being further developed so that it can be launched on the market in 2-3 years.

The Fashion for Good Museum has opened its doors for the new pop-up exhibition News From The Future. As part of a new Educational Programme and Toolkit - developed by the Fashion for Good Museum team - a selection of up-and-coming talents composed of Dutch fashion students and emerging designers have been asked to respond to the question: “what could the future of fashion look like?” Their answers are revealed in the exhibition in the form of garments, videos, installations and more. This is a future-forward exhibition where you can explore different fashion perspectives beyond the climate crisis, giving hope and, perhaps, a reality check.

Post-consumer waste, overconsumption and the pollution of our waterways are just some of the industry issues we are currently facing. Mirrored against rising temperatures and increasingly unstable weather conditions, the global shift as a result of climate change is inevitable. What does this mean for our future generations? How do we move forward from here? This raises one central question: What does the future of fashion look like?

News From The Future, the new exhibition at the Fashion for Good Museum, invited Dutch students and new creative voices to reflect on these questions. The emphasis on emerging talent is a common thread throughout the exhibition’s and the look and feel is designed by upcoming graphic designer Sara Biatchinyi.

Participating artists and designers include students from art and fashion schools across the Netherlands from the University of the Arts Utrecht, Zadkine MBO, MBO Rijnland and Saxion College. The students’ work was chosen after they participated in the educational programme “Classroom of the Future: the Stories Behind Cotton”. This programme was developed by the Fashion for Good Museum’s Curator and Education Coordinator Alyxandra Westwood and Education and Fashion consultant in sustainability Yophi Ignacia founder of The Future Mode, in collaboration with the aforementioned schools.

To further enhance these narratives, and to facilitate and promote a space for connection between emerging talent, the Museum invited Current Obsession Magazine - an interdisciplinary jewellery platform and magazine - to co-curate an installation and reflect on the future of jewellery. Over the course of the exhibition the Fashion for Good Museum will come to life hosting an art auction, panel discussion and a weekly updated installation, showcasing emerging talent. All of these elements together will collectively address the sustainable and regenerative design practices in both the Fashion and Jewellery industries.

Designer Kevin Paraiso (Paris/Benin) showcases a creative workshop in the museum, featuring looks from his Cosmic Summer .Dolkrey collection, which was presented during Spring/Summer ‘23 of Paris Fashion Week. “Cosmic Summer reflects on our desire to bring vibrant colours and a sense of uplift to the fashion of today and tomorrow. A cosmic news from the future.” A hopeful collection, with future-forward elements seamlessly integrated from the use of deadstock, circular materials and an on-demand tailoring business model with inhouse printing - presents a positive outlook.

Launching “Classroom of the Future: The Stories Behind Cotton”
The educational programme “Classroom of the Future: the Stories Behind Cotton'' has been developed into an open source toolkit for MBO and HBO education. The toolkit is live and available to download from the Fashion for Good Museum website as of the 30th of November 2023.

It consists of a set of six lessons all exploring the various aspects of cotton with specific emphasis on people and planet. The toolkit brings together different forms of interactive tools for the classroom: videos, podcasts,  lesson plans and workshops. The content shows the perspective of local and international makers and innovators working to create a better and fairer fashion system.
The programme was part of and based on the previous museum exhibition Knowing Cotton Otherwise (2022-’23) and invited students to reflect on the  exhibition themes - water, transparency, agriculture, climate, processing, origin, labour/forced labour and end-of-use - through their own perspective. The educational methodology and goals within the programme were developed to level the field between MBO and HBO students, reflecting a more realistic image of what it's like working in the professional field. During the programme students worked together equally, challenging the segregated Dutch education system and aiming for new results.

News From The Future is open to the public at the Fashion for Good Museum at Rokin 102 in Amsterdam.

The Textile & Fashion Forum Helsinki 2023, organized by Finnish Textile & Fashion and EURATEX, highlights the discourse on sustainable practices within the textile and fashion industry. This two-day event, scheduled for 26-27 October at the Little Finlandia event center in Helsinki, will include a day of curated company visits.

Finland’s leading textile and fashion forum will showcase the industry's pioneering companies and their pursuit of a sustainable and resilient future. With insightful discussions, inspiring speakers, and thrilling business cases, the event drives transformation and sets new benchmarks for the textile and fashion sector.

The Textile & Fashion Forum Helsinki 2023 will focus on critical industry themes. The transformation of the textile and fashion industry relies on three key pillars: the creation of different circular business models matching growth with sustainability, a green and digital transition where information technology is necessary to deliver sustainability, and scaling the business, as how start-ups can make a leap and big companies can evolve their growth strategies. These three themes will be discussed in depth during the event.

The speaker lineup, drawn from Finland, Europe and beyond, demonstrates the expertise connecting on this platform. Noteworthy figures include Tiina Alahuhta-Kasko, President & CEO of Marimekko; Kai Mykkänen, Minister of Climate and the Environment of Finland; Marcus Hartmann, Head of Public Affairs & Sustainability at H&M; Liljana K. Forssten, Range Strategist at IKEA; and Virginijus Sinkevičius, European Commissioner (on video).

The mission of Accelerating Circularity is to create new supply chains and business models to turn textile waste into mainstream raw materials. Accelerating Circularity has created a working group, the Alliance of Textile Chemical Recyclers (ACTR), to meet and address the textile industry with a common voice to facilitate accurate information on textile chemical recycling.

“We formed this collective to move chemical recycling technology forward, share common definitions, and address policies in a collaborative way to maximize the elimination of textile waste to landfills and incineration” explained Karla Magruder, Founder and President of Accelerating Circularity. “Chemical recycling technology has many benefits, including quality more similar to virgin fiber and the ability to recycle multiple times.”

ACTR plans to provide the industry with information on how textile chemical recycling can:

• offer solutions for diverting textile waste to landfill
• enable textile to textile recycling versus incineration/landfill
• provide sustainably sourced/circular materials
• support brand/retailers/producers in achieving their CO2 reduction targets
• provide long term price stability and consistent supply of raw materials versus virgin

Members of the Alliance include founding members Eastman, Lenzing, and The LYCRA Company, as well as key innovators Circ®, Sappi, Renewcell, Infinited fiber, Worn Again Technologies, Gr3n, CuRe Technology, and OnceMore® from Sodra.

As a first step, the ACTR (Alliance of Chemical Textile Recycling) is introducing a dictionary of common terms developed to educate the industry on the chemical recycling of textiles.

The combination of high strength and rigidity with sustainability and a neutral carbon footprint makes flax the ideal raw material for natural fibre-reinforced plastics. vombaur offers composite textiles made of this natural fibre for the automotive, wind power, construction or sports industries and many other sectors.

Flax fibres are rigid and tear-proof. They have natural bactericidal properties, are virtually antistatic, stain resistant and easy to spin. Humans have taken advantage of these properties to manufacture robust, stain-resistant and lint-free textiles. Between the late 19^th and late 20^th centuries, cotton largely replaced natural fibres. Because flax can be grown in Europe and consumes less energy and water than cotton production, the material's importance is currently growing again, for both clothing and composites. Regional textile value added chains in Europe – flax makes them possible.

Ideal mechanical properties
vombaur makes the mechanical properties of flax usable for lightweight design. Because flax fibres are particularly rigid and tear-resistant, they ensure great stability in natural fibre-reinforced plastics (NFRPs). And thanks to their low density of 1.50 g/cm3, the fibres weigh virtually nothing. On top of this, fibre-reinforced plastics are less prone to splintering than glass fibre-reinforced plastics.

Excellent carbon footprint
The cultivation of flax binds CO₂ and the production of natural fibre-reinforced plastics (NFRPs) generates approximately one third less CO₂ emissions compared with conventional fibre-reinforced plastics. Energy consumption is substantially lower. This saves resources. The use of flax fibre tapes by vombaur in lightweight design applications also improves the product's carbon footprint and contributes to a secure, regional supply chain.

Recycling without impacting on quality
Flax offers another sustainability benefit: more recycling cycles than glass- or carbon fibre-reinforced plastics – without impacting on quality. Thermoplastic fibre-matrix prepregs are melted and reused in the recycling process. The natural fibres can be used in other products such as natural fibre-reinforced injection moulded parts.

Sustainable product developments for many industries
"Orthoses for high-performance sports, high-tech skis, wind turbines, components for the automotive industry or aerospace, but also modern window profiles – the application scope for our lightweight design flax tapes is amazingly diverse", as Carl Mrusek, Chief Sales Officer at vombaur explains. "After all, wherever flax tapes are used, three key properties come together: light weight, strength and sustainability".

The Lenzing Group, a leading provider of specialty fibers for the textile and nonwoven industries, has made significant technical improvements to its Purwakarta site (PT. South Pacific Viscose). Lenzing has invested more than EUR 100 million since 2021 to convert existing production capacity to specialty viscose. With the imminent completion of the investment, Lenzing is in a better position to serve the strongly growing demand for specialty fibers.

Lenzing is striving for certification according to the standard of the internationally recognized EU Ecolabel1. The product portfolio would thus include LENZING™ ECOVERO™ branded fibers for textiles and VEOCEL™ branded fibers for nonwoven applications. In the course of these substantial investments, Lenzing has set the goal of significantly reducing emissions at the site. Moreover, the site started to obtain renewable grid electricity and promotes a changeover to biomass in line with Lenzing's goals of reducing carbon emissions per ton of product by 50 percent by 2030 and achieving carbon-neutral production by 2050.

“Demand for specialty fibers with low environmental impacts continues to grow structurally. We see enormous growth potential in Asia in particular. Through our investments in Indonesia and also at other Lenzing sites worldwide, we are in a better position to serve this growing demand. At the same time, we continue working tirelessly to make the industries in which we operate even more sustainable and to drive the transformation of the textile business model from linear to circular,” says Stephan Sielaff, Chief Executive Officer of the Lenzing Group.

The Lenzing Group, a world-leading provider of specialty fibers for the textile and nonwoven industries, has been awarded platinum status in the EcoVadis CSR rating. The rating comprehensively covers the four most important practices in the area of corporate social responsibility: environment, fair working conditions and human rights, as well as ethics and sustainable procurement.

For the third time, Lenzing has been awarded Platinum status for its sustainability performance by EcoVadis, a leading international provider of sustainability ratings for companies. This puts Lenzing in the top one percent of companies worldwide rated by EcoVadis.

EcoVadis has become the world's largest and most trusted provider of corporate sustainability ratings since its founding in 2007, creating a global network of more than 100,000 rated companies worldwide. The methodological framework assesses companies' policies, actions and activities, as well as their published reports, related to the environment, labor and human rights, ethics and sustainable procurement.

In line with its sustainability strategy “Naturally positive”, the Lenzing Group has set ambitious targets in each of its core strategic areas to further strengthen its path from a linear to a circular economy model. Lenzing reports annually on the corresponding implementation measures and the progress made in its sustainability report. This level of commitment and transparency was particularly positively highlighted by EcoVadis in its assessment. The rating provider also emphasized the Lenzing Group's comprehensive measures in the areas of environment, ethics, and labor and human rights.

Climate change is causing temperatures to rise and storms to increase. Especially in inner cities, summers are becoming a burden for people. While densification makes use of existing infrastructure and avoids urban sprawl, it increases the amount of sealed surfaces. This has a negative impact on the environment and climate. Green facades bring more green into cities. If textile storage structures are used, they can even actively contribute to flood protection. The German Institutes of Textile and Fiber Research (DITF) have developed a corresponding "Living Wall".

The plants on the green facades are supplied with water and nutrients via an automatic irrigation system. The "Living Walls" operate largely autonomously. Sensory yarns detect the water and nutrient content. The effort for care and maintenance is low.

Innovative hydraulic textile structures regulate water flow. The rock wool plant substrate on which the plants grow has a large volume in a small space thanks to its structure. Depending on how heavy the precipitation is, the rainwater is stored in a textile structure and later used to irrigate the plants. In the event of heavy rainfall, the excess water is discharged into the sewage system with a time delay. In this way, the "Living Walls" developed at the DITF help to make efficient use of water as a resource in post-densified urban areas.

The research project also scientifically investigated the cooling performance of a green facade. Modern textile technology in the substrate promotes the "transpiration" of the plants. This creates evaporative cooling and lowers temperatures in the surrounding area.

The work of the Denkendorf research team also included a cost-benefit calculation and a life-cycle analysis. Based on the laboratory and outdoor studies, a "green value" was defined that can be used to evaluate and compare the effect of greening buildings as a whole.

Bangladesh will stage the world’s first climate conference for the fashion industry this autumn, on 12 October. The Bangladesh Climate Action Forum will convene policy makers, garment manufacturers, fashion retailers and other industry stakeholders to look at solutions for decarbonising global textile supply chains.

The event will focus on technological and financial challenges around reducing emissions. Most of the world’s leading fashion brands have now set ambitious targets for reducing supply chain emissions. These targets relate to 2030 by which time many brands aim to reduce emissions by 50 per cent, and 2050 where most fashion brands aim to be carbon neutral.

The Bangladesh Climate Forum Action will examine causes of climate crisis, its urgency, impacts we have already seen, and what we can expect under both businesses as usual and rapid decarbonisation scenarios.

Also presenting at the event will be the Government of Bangladesh, which will address Bangladesh’s actions to mitigate the impacts of the climate crisis. Bangladesh is particularly vulnerable to climate change and is ranked the seventh extreme disaster risk-prone country in the world according to a report from the Global Climate Risk Index 2021. Tropical cyclones, tornadoes, floods, coastal and riverbank erosion, droughts and landslides are the major climate-induced hazards in Bangladesh.

The Bangladesh Climate Forum Action will also look at approaches towards decarbonization, including NetZero goals and timelines. Speakers will discuss globally recognised pathways for electricity/transportation/industry decarbonisation.

Renewable energy will also be under discussion. If fashion brands are to hit climate targets, it is imperative that supply chains switch to renewable energy and away from gas and fossil fuels. The event will look at challenges around the de-carbonisation of the electricity grid in Bangladesh, as well as the rate of transition toward renewable resources by garment factories, including solar power.

A key element of the event will be evaluation of practical solutions for Bangladesh’s RMG industry. It will profile specific solutions such as energy efficiency, machine upgrades, the electrification of thermal loads, direct power purchase agreements and biomass fed thermal systems. It will also discuss the challenges faced in the industry including business climate (and cycles), pricing, financing challenges, target setting and execution, policy opportunities, knowledge gaps and availability/scaling of solutions.

Financial challenges around decarbonisation of supply chains are significant, and it is far from clear who will pay for the technological upgrades required. While some investment support systems exist – such as lower interest financing – these are not always available, accessible or affordable for the majority of the RMG companies.

The event will explore financial options, changes to business/pricing models, opportunities for de-risking/underwriting investments, direct investment and other tools that need to emerge to address financial challenges and plug the funding gap. The event will also explore opportunities to decouple climate action from business cycles so that the 2030 targets can be met.

• The A+A Expert Talks head into their third round

On 20 June 2023 between 10.00 am and 11.30 am experts from the fields of sustainability, circular economy, environmental protection as well as corporate fashion and product management will be presenting lectures and discussing the topics of sustainability in supply chains, standardisation and quality seals as well as the associated challenges and solutions in cooperation with German Fashion. They will thereby provide a platform for the exchange of knowledge, experience and innovative approaches.

The focus on sustainability and the circular economy reflects the growing relevance of these topics in the world of work. More and more companies recognise the need to make their business practices more sustainable and optimise the use of resources.

This Expert Talk will be presented by Irina Olm, In-House Lawyer & Counsel of GermanFashion Modeverband Deutschland e.V. and Expert for Circular Economy and CSR, who will contribute her know-how on the European level.  

Benjamin Helfritz, Head of Quality in Digital and Green Transformation, DIN – German Institute for Standardisation, will introduce participants to the new standards for the Green Transition.  
The Digital Product Passport (DPP) is needed for both the green and digital transition. However, it will only achieve its full added value if interoperability is ensured between existing and emerging systems. The use of the DPP promotes more sustainability and digital progress.

Henk Vanhoutte, Secretary General, European Safety Federation (ESF) and Lucia Mendori, Regulatory Affairs Associate / Chair ESF Working Group Sustainability will present practical examples and concrete application factors for sustainable PPE as well as solutions for sustainable jobwear. They will provide an overview of survey results from their members regarding various sustainability aspects – pointing to how the industry is treating this important topic but also flagging up the limits to the sustainability of PPE.

Lena Bay Høyland, Product Director of the Swedish workwear manufacturer Fristads Kansas will share the sustainability strategy of her company which has committed to minimise its environmental impact by targets and effective measures. The progress made by Fristads Kansas was measured using concrete figures and audits. This is a use case highlighting the innovations and challenges associated with sustainable jobwear.

By organising the Expert Talks the leading international trade fair A+A jointly with its strategic partners from the German Federal Association for Occupational Safety and Health (Basi), Fraunhofer IPA, German Fashion (Modeverband Deutschland e.V.), DGUV (Germany Statutory Accident Insurance), BAuA (Federal Agency for Occupational Safety and Health), BMAS (Ministry of Labour and Social Affairs), IVPS Interessenverbund Persönliche Schutzausrüstung e.V. (PPE Stakeholder Association) as well as IFA (Institute for Occupational Safety) will provide its community with a networking and information platform.