From the Sector

A new type of pure synthetic leather meets the requirements of the European Ecodesign Regulation. Made from a bio-based plastic, it is biodegradable and meets the requirements for a closed recycling process.

Many synthetic leathers consist of a textile substrate to which a polymer layer is applied. The polymer layer usually consists of an adhesive layer and a top layer, which is usually embossed. The textile backing and the top coat are usually completely different materials. Woven, knitted, or nonwoven fabrics made of PET, PET/cotton, or polyamide are often used as textile substrates. PVC and various polyurethanes are commonly used for coatings. The use of these established composite materials does not meet today's sustainability criteria. Recycling them by type is very costly or even impossible. They are not biodegradable. The search for alternative materials for the production of artificial leather is therefore urgent. In 2022, the EU adopted the Sustainable Products Initiative (SPI) ("Green Deal"). It includes an eco-design regulation that considers a product's life cycle in the conservation of resources. For textile and product design, this means incorporating closing the loop or end-of-life into product development.

In an AiF project carried out in close cooperation between the DITF and the Freiberg Institute gGmbH (FILK), it has now been possible to develop a synthetic leather in which both the fiber material and the coating polymer are identical. The varietal purity is a prerequisite for an industrial recycling concept.

The aliphatic polyester polybutylene succinate (PBS) was recommended as the base material because of its properties. PBS can be produced from biogenic sources and is now available on the market in several grades and in large quantities. Its biodegradability has been demonstrated in tests. The material can be processed thermoplastically. This applies to both the fiber material and the coating. Subsequent product recycling is facilitated by the thermoplastic properties.

In order to realize a successful primary spinning process and to obtain PBS filaments with good textile mechanical properties, process adjustments had to be made in the cooling shaft at the DITF. In the end, it was possible to spin POY yarns at relatively high speeds of up to 3,000 m/min, which had a tenacity of just under 30 cN/tex when stretched. The yarns could be easily processed into pure PBS fabrics. These in turn were used at FILK as a textile base substrate for the subsequent extrusion coating, where PBS was also used as a thermoplastic.

With optimized production steps, PBS composite materials with the typical structure of artificial leather could be produced. Purity and biodegradability fulfill the requirements for a closed recycling process.

The Fashion for Good Museum publishes its legacy document. The report was prompted by the museum’s closure on June 5th, 2024. It represents the museum’s mission, summarising invaluable insights gathered over six years and key results such as reaching 115.000 visitors and creating a dedicated community of more than 250.000 followers online. Committed to transparency and collaboration, Fashion for Good shares its reflections, tools, and transferable learnings, as well as the future of its collections and next steps, continuing to inspire positive change within the fashion ecosystem. All information can be accessed on the Fashion for Good website for continued use and benefit of educators, the cultural sector, and the wider public.

Looking back on its journey, the Fashion for Good Museum celebrates achievements such as hosting 115.000 visitors, including 8.000 students from 200 schools, curating 13 exhibitions, offering over 75 events, launching 4 educational programmes, reaching both current and future generations, and inspiring many to drive change in the fashion industry. With an earned media value of over 46 million Euros through press coverage since 2017, Fashion for Good's influence has been significant, evident in its 250.000 social media followers and 15.000 newsletter subscribers.

The report fulfils the promise Fashion for Good made in 2017 – to share their journey, learnings, and most impactful activities with the world. Within these pages, readers will discover reflections on their messaging, insights about creative partnerships with entities such as Lowlands Festival, Dutch Design Week, and Museumnacht to case studies of pioneering exhibitions. Their programming was created around themes and topics, such as the untold stories around cotton, circularity, and the future of biomaterials to educate and inspire visitors, ultimately empowering them to take action themselves.

Reflecting on the output of the museum during its short existence, as well as its footprint and wide reach, while acknowledging the challenges encountered during its establishment and development, Fashion for Good distilled six key lessons from Fashion for Good's sustainable museum practices:

• Recognition of Broader Shift: There is a wider movement towards sustainability in the museum sector, exemplified by Fashion for Good and the new ICOM definition.
• Storytelling for Societal Change: Cultural institutions are crucial in driving societal change in fashion consumption through storytelling.
• Innovation through Limitations: Embracing organisational limitations can stimulate innovation in museum collection management and education.
• Audience Engagement: Understanding and expanding the core audience is essential for effective engagement in sustainability initiatives.
• Measuring Impact: It's challenging to measure impact for organisations with social missions, requiring clear success criteria.
• Establishing a Sustainability Framework: Defining sustainability within context is fundamental for organisational sustainability efforts.

• CARBIOS, L’OCCITANE en Provence and Pinard Beauty Pack join forces to establish an efficient European value chain for PET circularity
• The 100% biorecycled transparent bottle (from enzymatic recycling) will be on display at CARBIOS’ booth D02 at “Edition Spéciale” by LuxePack, held 4-5 June at the Carreau du Temple in Paris
• A key step towards achieving L'OCCITANE en Provence's eco-design commitment of 100% retail bottles made from 100% post-consumer recycled PET by 2027

CARBIOS and L’OCCITANE en Provence, an international cosmetics brand using natural and organic ingredients and long-term partner of CARBIOS, present a bottle in transparent PET made entirely from enzymatic recycling for a shower oil from the Amande range. In collaboration with converter Pinard Beauty Pack, this bottle exemplifies a shared desire to build en efficient European recycling sector to accelerate the transition to a circular economy for plastic, and meet brands' commitments for more sustainable packaging solutions. The bottle will be on display at CARBIOS’ Stand D02 at “Edition Spéciale” by LuxePack, the trade show dedicated to sustainable premium packaging, to be held on 4-5 June 2024 at the Carreau du Temple in Paris.

The 100% recycled PET bottle from CARBIOS' enzymatic depolymerization process was made with a European value chain committed to responsible consumption of sustainable materials. The bottle’s production began with the local supply of PET waste (already collected, sorted and prepared) to the CARBIOS industrial demonstrator in Clermont-Ferrand, France. The waste used consisted of colored bottles, multilayer trays and mechanical recycling residues, none of which are currently recycled using conventional technologies. CARBIOS deconstructed the PET waste into its original monomers, PTA and MEG, using its biorecycling technology. The resulting monomers were then repolymerized into new, fully recycled PET resins within Europe. In Oyonnax, France, these resins were blow-molded by Pinard Beauty Pack to create bottles according to L’OCCITANE’s specifications, and then filled with its shower oil at its Manosque plant.

Breaking new ground in plastics recycling means assessing the value chain from end to end. The big opportunities for the future are in fine-tuning the individual process steps; from the collection of recyclable materials to the recycling process and the end product. This is where the cooperation of Lindner and the EREMA Group comes in, officially launched following the 50/50 founding of the holding BLUEONE Solutions in August 2023 to which shares of Lindner Washtech were contributed. The expertise of EREMA, a manufacturer of extruders and filtration solutions for plastics recycling and the largest company within the EREMA Group, has now been combined with the expert know-how from Lindner Washtech, a leading provider of all-in-one solutions for shredding, sorting and washing plastic feed materials.

Data transfer ensures more efficient recycling processes
Process control is an especially important aspect of plastics recycling, which is why standardising the process control system was what the two companies focused on first. "Together, we have developed a platform that allows data to be exchanged between the extruder and the washing system," says Manfred Hackl, CEO of the EREMA Group at IFAT in Munich. "This enables us to analyse the data more precisely so that effective improvement measures can be deduced." All key parameters are taken into account and monitored via a digital interface. For example, it is possible to use information relating to the current throughput of the EREMA Pre Conditioning Unit to optimise the washing process as soon as possible so that it can compensate for fluctuations in capacity and achieve a significant increase in output. This data transfer represents a new step on the roadmap to digitalization.

High efficiency due to smart energy management
"To ensure sustainable recycling, it is necessary to find the right process for each application and to make sure that the individual process steps are perfectly coordinated," emphasizes Michael Lackner, Managing Director of Lindner. Coordinating the process steps has already achieved initial success in energy management, and a clear example of this is heat recovery. "We use the latent heat generated during the extrusion process as an energy source for the washing and drying process," explains Lackner. "This enables our customers to sustainably reduce their energy costs and carbon emissions".

Making the most of synergies along the value chain
Synergies need to be used to establish the quality standards specified for each end application. "The key question is how we can improve the end product and increase the overall efficiency of the recycling process at the same time," agree Manfred Hackl and Michael Lackner. This will only work if companies work together along the value chain. The industry leaders can already point to several examples where together they have improved recycling processes and made it possible to move away from downcycling. "An example of this is the recycling loop of HDPE starting material, which is processed into high-quality, food-safe rHDPE pellets using our two technologies," says Lackner. Lindner Washtech and EREMA continue to work intensively together to develop strategies for upcycling plastics and increase recycling rates.

From 20 to 22 July 2024, Innatex will once again host international green fashion labels presenting their collections for Spring/Summer 2025 at Messecenter Hofheim Rhein-Main near Frankfurt. The motto of the upcoming trade fair, ‘BLOOM’, emphasises the confidence in more sustainable solutions despite challenges in the green fashion industry.

The organiser is seeing an increase in enquiries from first-time exhibitors and design dicoveries who work with remnants or waste from the textile and other sectors. The summer fair aims to emphasise this form of circularity.

In keeping with this, three of the five Design Discoveries selected so far are located in the area of textile waste reduction. Tentation uses discarded tents to create modern, mostly outdoor-compatible pieces. While Halt.clothing stands for an innovative upcycling concept, the underwear label Avonté works with deadstocks. Softclox with flexible soles and the very feminine women's fashion Verlinne from Romania enrich the special area.

The trade fair is responding to feedback from buyers and, in cooperation with the Hesse Retail Association, is offering a special expert panel on the last day of the event to provide effective sales strategies. Innovative sustainable space concepts have been developed in collaboration with the Akademie Mode & Design AMD Wiesbaden. The students of the Interior Design degree programme use old materials from the INNATEX trade fair construction.

Global Fashion Summit: Copenhagen Edition 2024 will take place on 22-23 May in the Copenhagen Concert Hall. Presented by Global Fashion Agenda (GFA), a non-profit organisation that is accelerating the transition to a net positive fashion industry, the 2024 edition with mark the Summit’s 15th anniversary and will bring together  leaders to drive urgent social and environmental progress.
 
Her Majesty The Queen of Denmark will attend the Summit on 22 May and provide Opening Remarks. The Queen first attended the inaugural Summit in 2009 and has since spoken at every edition of the Summit, demonstrating her dedication to a more sustainable future.
 
Under the central theme ‘Unlocking the Next Level’, over 100 other esteemed speakers will take to the Summit’s historic stages to share action-based insights, including executives from: Kering, Patagonia, Maersk, Brioni, Conservation International, The New York Times, Ralph Lauren Corporation, H&M Group, Ganni, WWF, Re&Up, Fair Labor Association, and more.
 
With a 15-year foundation as a leading forum for sustainability in fashion, the event will attract over 1000 stakeholders from the fashion sector, adjacent industries, policymakers, solution providers, and more. The Summit’s programme will be structured around unlocking solutions to fashion’s biggest sustainability barriers, no matter where an organisation is on its sustainability journey. Sessions include: ‘Fragmented Futures: Fashion’s Policy Agenda’, ‘Luxury, Leather, and Land’, ‘Towards a Binding Agreement on Wages, ‘Pathways to Indigenous Partnership’, and ‘Ending Oversupply’.
 
Building on the impact of previous Summits, the 2024 edition will also host more action-oriented roundtable meetings. The closed-door sessions bring together groups of stakeholders to discuss relevant barriers, share learnings, and build collaborations to support the implementation of solutions. Roundtables will address topics such as: ‘Scaling Circular Textile Systems’, ‘Pay Equity Interventions in European Value Chains’, and ‘Impactful Influence’.
 
The Summit will also present the Innovation Forum, a curated exhibition of leading sustainable solutions. Summit attendees can meet with exhibitors covering the entire value chain – from innovative materials to end-of-use solutions.

Stahl has joined the Global Organization for PHA (GO!PHA), a non-profit platform that advocates and advances the use of polyhydroxyalkanoates (PHAs), a naturally occurring polymer that offers a lower-impact, bio-based alternative to traditional fossil-based plastic feedstocks.  

GO!PHA is a coalition of over 60 stakeholders ranging from producers and formulators to users as well as universities and research institutes. The members, all early adopters of PHAs, work together to increase understanding of this relatively new PHA technology and advance the science behind these renewable, compostable and biodegradable materials. As a member of the network, Stahl will have the opportunity to join forces with the wider PHA value chain to help move PHAs beyond the testing phase and accelerate the potential application of the technology in the coatings market. 

Integrated textile mill Nuevo Mundo is partnering with Archroma to offer collections utilizing Archroma’s EarthColors® agricultural waste based dyes and produced with zero liquid discharge and substantial resource savings.

A strategic partner of apparel brands, Nuevo Mundo is a market leader in South America with a 75-year history. It helps brands expand into new markets with value-added products that capture growing consumer demand for quality and sustainability. The company is a pioneer in the adoption of water-saving processes and chemicals that have minimal impact on the environment.

Nuevo Mundo is now reinforcing its commitment to sustainability with the creation of new collections that utilize Archroma’s biowaste-based EarthColors® dyes. Based on patented Archroma technology, these high-performance dyes are from non-edible agricultural or herbal industry waste in a process that helps to reduce the negative impact on water footprint, natural resources and climate change compared to conventional synthetic dye production where toxic and non-renewable oil derivative products are used as raw material.*

The organic raw materials used for the dyes created for Nuevo Mundo include residues from cotton plants, beets and saw palmetto. In addition to using these biowaste-based dyes, the EarthColors® collections will be produced in Nuevo Mundo’s zero liquid discharge facilities, providing savings in time, water and energy, as well as emissions.

Nuevo Mundo and Archroma intend their alliance to be a long-term collaboration, with plans to release new collections based on EarthColors® in the coming year and beyond.

*Based on internal LCA comparative screening

The transition towards safer and more sustainable chemicals is progressing in some areas, while in others, it is just beginning. This is the finding of a first, joint Europe-wide assessment of the drivers and impact of chemical pollution by the European Environment Agency (EEA) and the European Chemicals Agency (ECHA). The benchmarking found that more work is still needed to reduce the impact of harmful substances on human health and the environment.

The number of industrial chemicals scrutinised under the EU’s chemicals legislation to determine their safety has increased substantially. Authorities now have much better knowledge about the hazardous properties of chemicals that are used across the EU, resulting in many actions to minimise and control the risks of several groups of substances.

According to the joint EEA-ECHA synthesis report on the EU indicator framework for chemicals, the overall use of the most harmful chemicals (in particular those that are carcinogenic, mutagenic and reprotoxic) is still growing but more slowly than the overall chemicals market growth. Pressure is increasing to avoid the use of so-called substances of concern and to implement the principles of the safe and sustainable by design framework.

There is a need to more effectively ensure that consumer products do not contain the most harmful substances, for example chemicals that are endocrine disrupting, that negatively affect the hormone system, or substances that are persistent, bioaccumulative and toxic, which present a risk for years to come even after their use has ceased.

More data and information are needed to better understand human and environmental exposure to those most harmful chemicals and their impacts. Still, the indicators show clearly that the shift to safe and sustainable chemicals must continue and should even be accelerated.

The report is based on a set of 25 key indicators, which monitor the drivers and impacts of chemical pollution in Europe.

Key findings

• Transition towards safer and more sustainable chemicals is progressing in some areas while in others it is just getting started.
• Action by authorities and industry has supported minimising and controlling the risks from several groups of hazardous chemicals. Efforts are ongoing to increase knowledge on chemical hazards and support risk management action where needed.
• Available data suggest that there is little evidence of progress towards eliminating substances of concern from waste and secondary materials. This is a barrier to the transition towards a more circular economy.
• Emissions of certain chemicals to water and air have fallen following specific EU regulations (e.g., on industrial emissions) and international actions, but further measures are needed to reach concentration levels that are not harmful for human health and the environment.
• Emissions from industry still lead to major costs in terms of damages to human and ecosystem health.
• Human biomonitoring offers the opportunity to understand human exposure to chemicals from multiple sources and thus health risks associated with chemical pollution. As such, biomonitoring forms a key tool to measure the effectiveness of chemicals legislation in protecting human health and the environment.

Freudenberg Performance Materials Apparel Europe (Freudenberg) has reached a further sustainability milestone: The new Freudenberg Apparel Competence Center in Sant’Omero, Italy, successfully completed the 4sustainability® Chemical Management protocol (4s CHEM) recently and reached the Advanced Level. The aim of the protocol is to progressively eliminate toxic and hazardous chemicals and related risks throughout the production process.

Competence center for interlinings
Freudenberg opened its Apparel Competence Center in Sant’Omero in May 2023. The factory in Italy is an innovative competence center that coats and finishes nonwoven, woven and weft interlinings for apparel customers in Europe.
Freudenberg has now taken the next logical step: as part of a comprehensive audit, the Apparel Competence Center has implemented ZDHC guidelines in its production process. To achieve this, Freudenberg called in the experts from Process Factory, a consultancy that specializes in sustainability topics. With their support, Freudenberg’s Sant’Omero site has reached the Advanced level of the 4sustainability® Chemical Management protocol (4s CHEM), in line with the ZDHC Roadmap to Zero Program.
Implementation is controlled annually based on this protocol and offers companies in the fashion industry a degree of reliability. It guarantees structured, fully transparent procedures, regular monitoring, and continuous control of Freudenberg’s production processes.  

ZDHC
By demonstrating its rejection of environmentally harmful chemicals and substances, the Apparel Competence Center shows that Freudenberg gives top priority to taking responsibility for people and the environment.
The aim of the Zero Discharge of Hazardous Chemicals (ZDHC) Foundation and its globally recognized Roadmap to Zero Program is to eliminate the release of toxic chemicals in the textile and fashion industry’s supply chain based on the ZDHC Manufacturing Restricted Substances List (ZDHC MRSL).
By applying the 4s CHEM protocol, the production site in Sant’Omero is sending a clear signal to the fashion industry that Freudenberg products meet the highest quality standards and are also safe and environmentally friendly.